This tv had a blown Z board, and was replaced. The SMPS went with it.
I changed the SMPS and the current problem is that the power supply turns on for a brief moment, then clicks itself back off.
With the SMPS removed from the TV, I can power it on and it will maintain two 60watt bulbs wires in series across VS.
Wondering at this point if there's an issue with the main board, or if the problem on the z board took out the x board...
The fuses located on the x board are good.
I changed the SMPS and the current problem is that the power supply turns on for a brief moment, then clicks itself back off.
With the SMPS removed from the TV, I can power it on and it will maintain two 60watt bulbs wires in series across VS.
Wondering at this point if there's an issue with the main board, or if the problem on the z board took out the x board...
The fuses located on the x board are good.
Comment