Pioneer PDP-LX5090 powers off straight away.

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Dang
    Badcaps Veteran
    • Aug 2013
    • 440
    • UK
    #21
    Re: Pioneer PDP-LX5090 powers off straight away.

    Photos of said IC.

    When switched on, there is a patch of white that glimpses before the Tv powers down, unplugging the power lead to the board will produce an even bigger white patch.
    Attached Files
    Last edited by Dang; 08-29-2015, 05:05 PM.

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK
        #22
        Re: Pioneer PDP-LX5090 powers off straight away.

        Hm.
        Two possibilities.

        1 is bad panel - not good if so.
        2 is just that IC bad - maybe able to replace it or salvage matching part.

        You can isolate VADR connector for that portion and see if you get partial discharge on the panel.
        DO NOT attempt to run the board without that IC installed - the panel may fry if the lower logic voltage is missing!

        Testing VADR voltage would lead you to the defective portion (why didn't you give me the voltages as I asked?)
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • Bushcat
            Pioneer PL-X9 motor speed control wobble
            by Bushcat
            I'm starting to re-cap a Pioneer PL-X9 turntable, specifically the motor control board, because although everything tests out OK according to the service manual, the speed wavers slightly despite the quartz lock light remaining on. So, I've decided to re-cap that board since it's the cheapest next step...

            Pioneer's passive component naming convention is clear to me. For example, CSZA R22M 35 is tantalum, radial leads, 0.22uF, 20%, 35V.

            BUT there are two capacitors on the board which have actual Pioneer part numbers: PCL-042. I can tell they are 0.1uF, 16V but don't...
            05-24-2023, 03:36 AM
          • malogro
            Acer Nitro 5 AN515-55-55M1 [GH51G mb] powers on, no vcc_core
            by malogro
            Hello all,

            I'm stumped on this guy, so wanted to see if anyone has any further ideas:

            Intro:

            This is an Acer Nitro 5 AN515-55-55M1 with unknown prior history (bought "as-is" on eBay). It charges the battery and powers on from both AC adapter and battery, so I think this rules out main power issues.

            Upon attempt to boot, it will "reboot" (meaning powers down and then powers on again) only once, and then stays stuck in a status of lights on / no post / no monitor. Powering on with fn+esc maxes out the fans on first boot attempt,...
            04-14-2023, 04:44 PM
          • EduCabral
            [Help Needed] Yatour YT-M06 (Pioneer 1) – Firmware or Schematic Request
            by EduCabral
            Hi everyone,

            I'm currently working on reviving a Yatour YT-M06 CD Changer Emulator module for use with a Pioneer 1 interface (specifically with a DEH-P5950IB head unit).

            While the unit is recognized as a CD changer, none of the USB, SD, or AUX features respond, which leads me to believe the firmware may be corrupted or incompatible.

            🔧 Details:
            • Model: YT-M06
            • Interface: Pioneer 1
            • MCU: Fujitsu MB89F202
            • Goal: Find a valid .bin firmware file or memory dump from a working unit

            I'm happy to attempt flashing, analyzing memory dumps, or doing hardware-level...
            07-15-2025, 12:26 AM
          • jose6326
            Samsung s32d850t powers off
            by jose6326
            Powers on as normal shows an image then powers off after 10 seconds

            I have to unplug it from the wall and replug to get it to turn back on but then shuts off

            No blown caps
            I searched for this model but nothing comes up...
            3 Photos
            11-29-2024, 11:21 PM
          • pixelcap
            Pioneer Kuro Pro 111FD 8 red blink error
            by pixelcap
            Pioneer Kuro Pro 111FD 8 blink red LED.





            I have been trying to solve the power-down 8-blink red LED problem with my Pioneer.


            So far I have replaced the power supply board, and the digital assembly board, I have reconnected the ribbons to all boards, ensuring the connections are good. Even though the problem is the 8 red light error and not the more common 8 blue light error code, I had Kcrownie,
            based in North Carolina replace the chips that cause the 8 blue LED problem (the main board and audio board) the plasma is still powering...
            1 Photo
            10-06-2024, 11:26 PM
          • Loading...
          • No more items.
          Working...