-
-
-
Re: List Of Vestel Tv Brand Names
Another is:
Mission
However its not on a mission to be reliable and last as its Vestel lolLeave a comment:
-
-
Re: List Of Vestel Tv Brand Names
also come across one badged as RED ps has anyone got a spare connector cable for one of these vestal boards 12 to 14 pin to connect lcd driver board to power supply, 17pw26 power boardLeave a comment:
-
-
Re: List Of Vestel Tv Brand Names
Loewe-Opta used tobe a very expensive set--On a parr with B&O....
Sad,--They've either gone bust, and Vesturd picked up the name or they now rebadge the turds!Leave a comment:
-
Re: List Of Vestel Tv Brand Names
Please also add:
LOEWE (a German Manufacturer-which produces the "cheap"-stuff in Turkey at Vestel)Leave a comment:
-
Re: List Of Vestel Tv Brand Names
how do u know if they are vestel TVs? I'm assuming I have one that was given to me to try repair, since its a craply made TV too, GVA? trying to find parts isn't easy mayb this is why I'm looking in the wrong direction for them?Leave a comment:
-
Re: List Of Vestel Tv Brand Names
Telefucker lol haha cheers
Leave a comment:
-
Re: List Of Vestel Tv Brand Names
Add OKI, Sunstech and Schneider. You have Telefuncen, but should be Telefunken.Leave a comment:
-
Hitachi 32HAE2351 Vestel 17MB171 - Rotate Image
Mainboard: VESTEL 17MB171 Chassis: VES315WNGB - 2D - N52
The TV was stuck on the logo and I couldn't access the update menu.
I couldn't find the firmware for the Hitachi 32HAE2351 and updated it with the Toshiba 32WA2063DG - Vestel 17MB171 firmware.
The image result was good, but the image is inverted.
The image rotation/mirror function doesn't exist in the Menu Server. I can't correct the image.
Do you have the firmware for the Hitachi 32HAE2351 - Vestel 17MB171 motherboard or a solution to rotate the image in... -
Hello everyone from Italy, I'm here to ask for help on a Vestel TV, I've had a Vestel TV branded "XD" with a broken screen for years, but now I've found a Telefunken (still Vestel but older) and I've mounted the panel on the "XD" TV, it works, but the screen is upside down, given that Vestel does not allow you to rotate the image from the service menu, does anyone know how to solve the problem? the original panel is marked ves315WNDS-2D-N12 while the main board 17mb110, the panel I mounted instead in the tv (from the telefunken) is a ves315WNDA-02. ... It is not worth repairing... -
Are there good brands for 'run capacitors' or 'start capacitors' that are used on electric motors or heat pump compressors? ... r are the good capacitor brands for electronics (power supplies, laptops, motherboards, etc.) also the good brands for run capacitors?
Yeah I know this might be a novice question, but I just wanted to be sure. I did do a search on the forum but did not see this question asked before.
Thanks -
Hi, I was recently given a Bush Smart TV by a friend and the main board seems to be hanging on by a thread.
Before we get to that, my first obstacle was figuring out the model number since the back sticker has gone for a walk. Upon taking off the back case, I noticed the following Vestel parts, 17MB95m mainboard, 17IPS71 (what I'd assume is power supply) and a VES420UNVL-3D-S02 display panel. After doing some research I think the TV I have is a Bush ELED42240FHDCNTD3D, based on the matching image here (https://www.manualslib.com/manual/11...td3d.html#manu... -
Hello, board 17MB140TC, I need to change the remote control in Vestel tool box 1.1. The original is there
Rc48xx_2D and I want to install TOSHIBA-Rc481xx, but the program says that a maximum of 9 characters can be entered. I only entered Rc481xx and the program does not accept the driver I have in the original. Does anyone know how to do this? Other Vestel codes work.
I can send a dump....
Leave a comment: