TC-P42X60 blinks 7 times?

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK
    #21
    Re: TC-P42X60 blinks 7 times?

    Is the panel completely free from cracks, even small ones? You need to cut the VFO track to the ICs if you want to isolate them.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • paulstef
        Badcaps Veteran
        • Dec 2013
        • 724
        • Canada
        #22
        Re: TC-P42X60 blinks 7 times?

        Originally posted by tom66
        Is the panel completely free from cracks, even small ones? You need to cut the VFO track to the ICs if you want to isolate them.
        I didn't see any obvious cracks, but I will have a look again.

        I also will try to find this VFO track you mentioned.

        I already ordered a used board but now you made me think, if they pull these boards from TVs with a damaged screen this may not have been such a good idea after all.

          Comment

          • paulstef
            Badcaps Veteran
            • Dec 2013
            • 724
            • Canada
            #23
            Re: TC-P42X60 blinks 7 times?

            And, Tom, by any chance do you know what the difference between the AN16628A and the AN16632A are?

              Comment

              Previous 1 2 template Next

              Related Topics

              Collapse
              • brithepi2k
                Samsung UE75TU7020k No picture, Standby blinks 2 times
                by brithepi2k
                My Samsung UE75TU7020k lights up fine when one of the ribbon cables are disconnected from the main board, lights stay on but not getting half a picture, I do the same with the other ribbon and put the other one in and lights stay on but not getting half a picture. The standby light flashes 2 times then reboots then it then tries to come back on again and just keeps looping until I take either one of the ribbon tables out (doesn’t matter which one I take out it stays lit when either one is out). I’ve tested the backlights but all working with none shorting out, I’ve replaced the main board...
                2 Photos
                04-23-2025, 10:05 AM
              • Samunggg
                Samsung UN70NU6900FXZA - Red Light Blinks 2 Times Then Screen Flickers
                by Samunggg
                I've happened upon this TV, it came with no power cord or remote and it seems to be experiencing a common issue where the red indicator light blinks 2 times then the screen flickers as if it's trying to turn on. No picture, no sound. I suspect the functions of the TV are in good order and that the underlying issue is with the power button which is missing. It's just a white tab where the button should be which means I can't cycle it.

                I wanted to know if there is anything I can do or if I should just get a replacement module with the hopes it will fix the system. Alternatively if...
                09-06-2023, 06:39 PM
              • mecha1166
                XR-77A80K Dead set, red light blinks 8 times. Cannot find error code list.
                by mecha1166
                I have a XR-77A80K here. When plug in & press power, white lindicator light flashes on & off. about 30 seconds later, indicator light flashes 8x red. Checked Sony, Power reset = unplug & plug in. Factory reset involves turning it on, then pressing remote buttons when a picture shows. Well, neither of these "resets" are for a dead set like this. Anyone know what 8 blinks indicates, from the schematic? Thanks!
                07-01-2024, 05:47 PM
              • magneh
                TX-65FZ800E - blinks 2 times red led no power
                by magneh
                Hi there

                I have this set with no power, blinks power led twice.

                This seems to point out to D board issue

                My first question is which one is the D board?
                The main board?

                Or one of the power boards?
                Are they labeled with this? (did not checked the boards yet)

                Thanks for any inputs...
                08-23-2023, 09:02 AM
              • Awejire
                HP EliteBook 820 G3 blinks five times
                by Awejire
                I have this HP EliteBook 820 G3 with board number 6050A2892301-mb-A01 that blinks caps lock five times when powered on and i have tested it some other known working RAM and discharge the BIOS by shorting the two pins but still same and I'm thinking if it could be currupt bios chip
                07-16-2022, 10:30 AM
              • Loading...
              • No more items.
              Working...