TC-P42X60 blinks 7 times?

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK
    #21
    Re: TC-P42X60 blinks 7 times?

    Is the panel completely free from cracks, even small ones? You need to cut the VFO track to the ICs if you want to isolate them.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • paulstef
        Badcaps Veteran
        • Dec 2013
        • 724
        • Canada
        #22
        Re: TC-P42X60 blinks 7 times?

        Originally posted by tom66
        Is the panel completely free from cracks, even small ones? You need to cut the VFO track to the ICs if you want to isolate them.
        I didn't see any obvious cracks, but I will have a look again.

        I also will try to find this VFO track you mentioned.

        I already ordered a used board but now you made me think, if they pull these boards from TVs with a damaged screen this may not have been such a good idea after all.

          Comment

          • paulstef
            Badcaps Veteran
            • Dec 2013
            • 724
            • Canada
            #23
            Re: TC-P42X60 blinks 7 times?

            And, Tom, by any chance do you know what the difference between the AN16628A and the AN16632A are?

              Comment

              Previous 1 2 template Next

              Related Topics

              Collapse
              • Nairolf
                Samsung DM32D – Red LED blinks 5 times, won’t start (possible mainboard issue)
                by Nairolf
                Hello,

                I have a Samsung DM32D display.
                When I try to power it on, the red LED blinks 5 times and nothing happens—the unit won’t start.

                Here’s what I have tried so far:
                1. Disconnected the cable between the mainboard and the power supply → the backlight turns on.
                2. Disconnected the main T-CON ribbon cable → same issue as before, the LED still blinks 5 times.
                3. Disconnected one of the two T-CON ribbons to the panel (tested each one separately) → same issue, the LED blinks 5 times.

                From these tests, I suspect the problem might be on the mainboard. Could anyone...
                3 Photos
                08-24-2025, 03:47 AM
              • JarzabekPZ
                HP Victus 15-fb0104nw not turning on, charging led blinks 3 times
                by JarzabekPZ
                Hi,
                I'm working on a HP Victus that is not turning on. When power button pressed it only blinks 3 times with charging led. I have checked input mosfets and they are fine. Also all coils are fine too. Battery was empty but I charged it with my lab PSU and laptop started on batery but is not charging. When battery is disconected and only PSU connected it takes 0 current and not starting. What can be the reason?
                09-18-2025, 08:16 AM
              • brithepi2k
                Samsung UE75TU7020k No picture, Standby blinks 2 times
                by brithepi2k
                My Samsung UE75TU7020k lights up fine when one of the ribbon cables are disconnected from the main board, lights stay on but not getting half a picture, I do the same with the other ribbon and put the other one in and lights stay on but not getting half a picture. The standby light flashes 2 times then reboots then it then tries to come back on again and just keeps looping until I take either one of the ribbon tables out (doesn’t matter which one I take out it stays lit when either one is out). I’ve tested the backlights but all working with none shorting out, I’ve replaced the main board...
                2 Photos
                04-23-2025, 10:05 AM
              • Samunggg
                Samsung UN70NU6900FXZA - Red Light Blinks 2 Times Then Screen Flickers
                by Samunggg
                I've happened upon this TV, it came with no power cord or remote and it seems to be experiencing a common issue where the red indicator light blinks 2 times then the screen flickers as if it's trying to turn on. No picture, no sound. I suspect the functions of the TV are in good order and that the underlying issue is with the power button which is missing. It's just a white tab where the button should be which means I can't cycle it.

                I wanted to know if there is anything I can do or if I should just get a replacement module with the hopes it will fix the system. Alternatively if...
                09-06-2023, 06:39 PM
              • mecha1166
                XR-77A80K Dead set, red light blinks 8 times. Cannot find error code list.
                by mecha1166
                I have a XR-77A80K here. When plug in & press power, white lindicator light flashes on & off. about 30 seconds later, indicator light flashes 8x red. Checked Sony, Power reset = unplug & plug in. Factory reset involves turning it on, then pressing remote buttons when a picture shows. Well, neither of these "resets" are for a dead set like this. Anyone know what 8 blinks indicates, from the schematic? Thanks!
                07-01-2024, 05:47 PM
              • Loading...
              • No more items.
              Working...