Panasonic TX-L42U2E No picture

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Andreasbest
    Badcaps Legend
    • Aug 2014
    • 1178
    • Hellas ( Greece )
    #1

    Panasonic TX-L42U2E No picture

    Hello fellow technicians once again.
    This time i have no photos of the tv since i haven't got it in my hands yet.
    So the problem is that that the green light (power) blinks like it should when you press it, then stays on but no picture and i think no backlight too.
    Any thoughts? Could it be just some bad caps on PSU?
    Tags: None
    • Andreasbest
      Badcaps Legend
      • Aug 2014
      • 1178
      • Hellas ( Greece )
      #2
      Re: Panasonic TX-L42U2E No picture

      None?

        Comment

        Previous template Next

        Related Topics

        Collapse
        • FZG
          Panasonic AG-1000B VHS player with bad picture quality
          by FZG
          Hello!

          I recently got an old VHS player from Panasonic and just for fun I want to try to repair this device. It is an AG-1000B portable VHS player from 1990 and it has a problem with picture quality in playback mode.

          Picture in playback mode is very noisy and often loses sync but the still images are nearly perfect.

          I want to know, is this something that could be solved by recapping or is the video head likely gone?

          Also, what mechanism is this?

          Any feedback is appreciated!...
          05-06-2024, 07:16 AM
        • Bazfletch3
          Panasonic TH-65FX800A backlight LED's working but picture is very dark
          by Bazfletch3
          Hi all

          While I have quite a decent background in electrical & electronic troubleshooting & repairs, this is my first time stripping down an LCD TV for repair.... I have inherited a 3yr old Panasonic LCD which has a picture, but it is quite dark (too dark to be watchable - but still quite easy to see; I didnt need a torch to see it).

          I started by checking and trying to adjust all of the picture and backlighting levels, but that made little to no difference. I also did a factory reset.

          From there I envisaged that the backlighting wasn't working, however...
          01-08-2024, 10:18 PM
        • Tr0ll
          T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
          by Tr0ll
          Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

          The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

          Original T-con:
          Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

          First replacement T-con:

          I thought it might be t-con and ordered new t-con from china(supposedly tested)...
          10-07-2023, 07:48 PM
        • JJAAMM
          SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
          by JJAAMM
          This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

          Problem
          TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
          07-06-2023, 06:01 AM
        • mar1in
          Panasonic TH-55AS670A no picture no sound
          by mar1in
          Hi everyone,

          I've got this Panasonic TV here with the following symptoms:

          * Standby Light is solid RED
          * Turning on using the Button on the TV (long press) would change LED to blinking GREEN
          * After a couple of seconds, LED is solid GREEN and without picture or sound.

          I've tried a couple of things before tearing it apart:

          * Resetting using various combinations of powerbutton and volume buttons pressing down while booting.
          * Activating Self Check according to service manual using IR Blaster (we have no remote unfortunately)...
          09-10-2023, 11:10 PM
        • Loading...
        • No more items.
        Working...