Hi, I have a 32 inch panasonic lcd tv that will not power on, Ive read a few articles on firmware updates but cant find the firmware to try, Does anyone know where i could get it?? Thanks
-
-
Re: Panasonic tx 32lmd70 stuck in standby
Not powering on is unlikely to be resolved by a firmware update... for a start how will you update the firmware with no display? Have you done basic troubleshooting yet, like check P board output voltages?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
-
Hi,
My LG Soundbar, SK10Y, has somehow ended up in an endless "PLEASE WAIT" loop and I am now starting to suspect that the firmware is causing this, and I can't manage to connect via the app to push a new firmware in as it never really starts.
I can trick it to start via HDMI ARC and it actually starts up, flashes OPTICAL and then goes to ARC where the sound (including sub) is perfect, but the white led indicator keeps blinking and after 20 seconds it says "GOOD BYE" and shuts down.
During these seconds the function button is not working... -
Hi everyone,
I've got a Samsung UEMU6199U which has no Standby LED and no reaction if try turning it on.
Voltages on the power supply board is okay. Backlight test is also okay.
I read about a corrupt firmware on IC1604 on some models, did a dump of this IC and turns out: First sectors are empty.
So I think my TV has exactly this issue.
Can someone please fix the dump?
And how do you do that?
As I understand you fill in the empty sectors and leave the rest as it is. But where do you get the "information" of what you... -
Hi All,
Wanting to learn some electronics repair skills.
I found a non working Panasonic TC-P60S30 and this is my first project / attempt.
So far I have found a blown cap on the main power supply board.
After replacing it there's still no standby power.
Poked around and found a resistor on the PSUB power supply board that measures open.
An online resistor calculator shows this is a 93k ohm resister.
My questions:
Is that correct, 93k ohms?
Is it a fusible resistor?
Lastly, how do I know what wattage?... -
After an update it stopped playing audio and video, I have reset it as it says in the manual and tried to reinstall the firmware over the internet but logging failed each time and I tried to download the firmware to install it by usb but it does not appear on the official page, could you help me? Since it would be a shame to have to get rid of him, European version Thank you very much
Best regards.
Anyone got their hands on firmware for Marantz SR5008 stuck in update loop -
I took an ebay gamble on an LG xboom pn5 speaker which was listed as having battery issues (turning on then off).
I got it earlier today and concluded it's in a demo mode because of the following:- When it's plugged in, it'll turn on and the power button will not turn it off
- Battery is healthy, reading 4.2v and not swollen, charges according to the xboom app
- the play/pause and volume buttons don't work
- You can pair to it and play music fine, as long as it's connected to power
- The bluetooth connection is disconnected after 5 seconds of audio pausing
- The DTS setting is defaulted
Comment