Toshiba 32BV702B- DEAD

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • WallArt-Online
    Member
    • Aug 2013
    • 29
    • uk

    #21
    Re: Toshiba 32BV702B- DEAD

    Thank you so much Tom! Is this old broken psu any good to you?

    The replacement was only £25 inc p&p so wasn't all bad!
    Attached Files

    Comment

    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK

      #22
      Re: Toshiba 32BV702B- DEAD

      Nice fix in the end... Keep the broken board for spares.

      A suggestion: apply thermal grease to the diodes on the PSU to avoid future failure.
      This should keep them at the same temperature. (Imbalance in temperature causes the failure.)
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • WallArt-Online
        Member
        • Aug 2013
        • 29
        • uk

        #23
        Re: Toshiba 32BV702B- DEAD

        Thank you! And it's cool your only in Leeds! If I ever get really stuck I could pass by you!

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #24
          Re: Toshiba 32BV702B- DEAD

          I don't really do TV repairs that much any more - only very occasionally - the rise of the supermarket LED has made it much less economical to do.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          Related Topics

          Collapse

          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            11-22-2024, 01:46 PM
          • k370
            Yoga3 Pro-1370 Board NM-A321 DEAD no power at all
            by k370
            Hi everyone,

            I have a NM-A321 board that is dead, with no power at all.

            When I received the laptop, the +5VPMIC line was shorted. Removing the PU3 (ISL95905) solved the short, so I ordered and replaced the ISL.

            With the new ISL, the short is gone, but still no voltages at all. I measured the following rails:
            • +3VALW
            • +5VAUX
            • 1.2VSUS_PWRGD
            • 3VALW_PGD
            • 1.05VAUX_PWRGD

            Additionally, the ISL95906 (PU3) is not getting any voltage on the VIN rail.

            The only place on the board where I find any voltage is on the first MOSFETs, specifically:...
            09-23-2024, 11:57 AM
          • howardc64
            TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
            by howardc64
            All left and right refers to looking from rear of TV (or looking from front with TV upside down)
            • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
            • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
            ...
            07-24-2025, 05:17 PM
          • Asraf Atb
            Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
            by Asraf Atb
            Hi everyone,

            Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

            Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

            I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
            01-27-2025, 05:02 PM
          • Document Archive
            Toshiba Satellite Pro C660-1NQ Specification for Upgrade or Repair
            by Document Archive
            This specification for the Toshiba Satellite Pro C660-1NQ can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the C660-1NQ boardview and C660-1NQ schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Toshiba...
            09-06-2024, 05:27 AM
          • Loading...
          • No more items.
          Working...