Schematics Philips 42C128128UE-52

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • biljon
    Member
    • Apr 2014
    • 11
    • England
    #1

    Schematics Philips 42C128128UE-52

    I have a old Philips TV that has a burnt resistor and i can't find what value it should be.
    The part number on the board is 5601.
    Anyone that have or know where i can find schematics for this old set?
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12206
      • U.S.
      #2
      Re: Schematics Philips 42C128128UE-52

      http://www.toms-service-manuals.com/...h=Submit+Query thanks goes to tom66.
      Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • skynet85
          VGC-LV1S MBX-199 M820/M830 find the schematics
          by skynet85
          The device is quite old, M/V MBX-199 M820/M830
          1P-0087J02-8011, the video chip flew (artifacts - no picture), removed the old one and installed a new one, but before installing the new one, the area under the video chip sank slightly and Pyataks were found, under a microscope, the contacts were not involved, it was decided to install. Now after switching on there is no initialization, all voltages are normal,
          I couldn't find a diagram, maybe someone will have one. The MBX-199 motherboard was also installed on these models, but I couldn't find the schematics for these either PCG-2E1M...
          12-04-2023, 02:37 AM
        • mgd
          MSI GF65 : Request help for find a burn IC ALHM 889 (or schematics)
          by mgd
          " Hello guys. i have a Laptop MSI GF 65 (motherboard MS-16W REV ) with à IC in short circuit. It's mark "ALHM 889"
          think it's the IC for regulate the Fan of GPU. I can't find any datasheet of this IC

          Can you post the schematics for this motherboard for locate the IC or tell me what it's the reel part number of this chip

          Thank you for the help. Really appreciate in advance
          2 Photos
          09-28-2024, 03:52 AM
        • dbuergi
          Help to identify components / find schematics on a Flir Scout TKX board
          by dbuergi
          Hi all,

          i got a Flir scout where a connector was ripped off and i will have to make new pads. One big problem i have right now is that 2 small smd components are missing near the pads and i was only able to find a comparable pic of this part of the board.
          So right now i need to know what i need exactly for a replacement and the values. I contacted Flir by mail but they don't give out schematics and told me that i can use the guarantee if i have it (funny guys).
          Anybody has an idea what i can do?
          2 Photos
          09-09-2024, 03:11 AM
        • 225xtrap
          can anyone help me find schematics or boardview for MM1500KFD (down4sound amp)
          by 225xtrap
          i have searched nearly everywhere, and asked the company directly and they refused. i have negative 14.5 volts coming out the speaker out. they refused to RMA cause i am out of warranty. which is of course their right to do so, but unfortunately due to family circumstances i was unable to use it until now and it was DOA straight out of the box. i was hoping they would take pity on me but they don't care. you can't even download the user manual from them its crazy. i intend to fix this myself but i think it might be helpful if i had a schematic. as always any help is greatly appreciated....
          08-19-2025, 01:07 PM
        • Dorbinar
          WHere to find schematics and boardview. Pay or not?
          by Dorbinar
          Hey all,
          I am new to this forum. I often find myself searching fort schematics and boardview. I used google but often I end up on pay site. What is the best option? Is there a way to get them for free? Is there something ZI am missing that I cannot find free schematics and boardview. Any directions as to how would be appreciated. I do not want to constantly posting need hep finding...

          Thanks
          03-09-2022, 06:50 PM
        • Loading...
        • No more items.
        Working...