Hello
I received a Sharp LC-37SB24U. When I power it up, the OPC and Power LED both blink together once and then the Power LED once by itself. This 2 step blinking repeats itself. I tried the HW reset of holding down the VOL up /Channel Down buttons. That causes a reset where the Power LED is solid green. Then after a few seconds the error flashing codes resume. I was wondering if anyone may have encountered this error code and can tell me what it means. I also disconnected the inverter board and tcon cables to the display and still resulted in the same condition. Seems to be related to the main board or power supply?
thanks for any help in advance!
Joe
I received a Sharp LC-37SB24U. When I power it up, the OPC and Power LED both blink together once and then the Power LED once by itself. This 2 step blinking repeats itself. I tried the HW reset of holding down the VOL up /Channel Down buttons. That causes a reset where the Power LED is solid green. Then after a few seconds the error flashing codes resume. I was wondering if anyone may have encountered this error code and can tell me what it means. I also disconnected the inverter board and tcon cables to the display and still resulted in the same condition. Seems to be related to the main board or power supply?
thanks for any help in advance!
Joe