Announcement

Collapse
No announcement yet.

Techwood 32884 HD Digital

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Techwood 32884 HD Digital

    Hi i am having a problem with a Techwood 32884 HD Digital lcd tv
    the problem is that the blue and orange LEDs are flashing, if you keep pressing power on remote it comes on and works as it should side buttons do the same
    power supply is a VESTEL 17pw25-3 and mainboard is a VESTEL 17mb60-2
    i have done a factory reset MENU 4725 and still the same so im at the point where it needs the firmware updating or its corrupt?
    the number on the white label is 10070358
    the version at the moment is V.06.2.D dated 2010-09-08
    the screen is LG
    the tuner is Samsung

    can someone supply the needed firmware

    any help would be great
    many thanks
    Gary

    #2
    Re: Techwood 32884 HD Digital

    any idea where to get the firmware from please

    regards Gary

    Comment


      #3
      Re: Techwood 32884 HD Digital

      If the set boots up and run:

      Enter MENU 4725
      Plug in USB stick which is **COMPLETELY BLANK** and formatted FAT32
      Select "NVRAM download" or similar
      This will copy the firmware from the TV to the USB

      Verify the files on a computer look good (should be mboot.bin, and others)

      Then install the firmware using the normal method.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment


        #4
        Re: Techwood 32884 HD Digital

        thanks Tom66 i will give that a try when weve moved
        thank you for your help

        Comment


          #5
          Re: Techwood 32884 HD Digital

          Originally posted by tom66 View Post
          If the set boots up and run:

          Enter MENU 4725
          Plug in USB stick which is **COMPLETELY BLANK** and formatted FAT32
          Select "NVRAM download" or similar
          This will copy the firmware from the TV to the USB

          Verify the files on a computer look good (should be mboot.bin, and others)

          Then install the firmware using the normal method.

          hi Tom66 i have now got round to try the above idea.... but there is no option to do anything like it i have tried all available setting tabs

          any other ideas anyone please

          Comment

          Working...
          X