LG 50PJ350 plasma clicking on and off.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Mikeyboy2007
    Badcaps Veteran
    • Mar 2013
    • 745
    • Scotland
    #1

    LG 50PJ350 plasma clicking on and off.

    Hi guys i have a LG 50PJ350 and when you switch on the screen flashes and tv turns off but then trys to switch on again and does same thing before shutting itself off to standby. I have done a bit of research on google and found a page for PSU EAY60968701 and same problem is told to replace 1 fuse (F302), 1 diode (D304), the power resistors as shown on the pictures (R927 and*R929 for the board revisions*with two resistrs) and the IC301 voltage regulator IC.

    Can anyone get me a scematic or tell me which parts i can buy as i am unsure.
    Tags: None
    • sordids999
      Badcaps Legend
      • May 2013
      • 2161
      • uk
      #2
      Re: LG 50PJ350 plasma clicking on and off.

      http://www.ebay.co.uk/itm/EAY6096870...item3f373dcc48

      found this for you

        Comment

        • Mikeyboy2007
          Badcaps Veteran
          • Mar 2013
          • 745
          • Scotland
          #3
          Re: LG 50PJ350 plasma clicking on and off.

          Thanks Sordids999. Will buy that and give it a try cheers

            Comment

            • Mikeyboy2007
              Badcaps Veteran
              • Mar 2013
              • 745
              • Scotland
              #4
              Re: LG 50PJ350 plasma clicking on and off.

              @Sordids999 ordered that kit and swapped out components, now fully working. thanks for the help.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • bffargo
                  2014 LG 60" Plasma shut down just clicking unless I disconnect 17V line to main CPU
                  by bffargo
                  LG 60PB66550 NOV 2014
                  PSU: EAY63168603
                  PCB: EAX65359531 2013.11.01 Rev:1.0

                  Main board: EAX65399305(1.0) 13.11.27 PU42A/PA42A/PD42A

                  Symptom:
                  While watching, just went black and started clicking relay every few seconds.

                  Initial diagnosis:
                  Removing JUST the main CPU/Input PCB from circuit stops the clicking. No problems with any other boards/drivers. (Removing all other boards and only putting Main back in is all it takes to start clicking again)

                  Deeper diagnosis:
                  Pulling pins #1/#2 (Blue/Grey) from the connector housing...
                  09-09-2022, 07:34 PM
                • Sisko
                  Onkyo-593 No power and now clicking sound
                  by Sisko
                  Hi all!!

                  Ok just got a Onkyo SKW-593 sub woofer that has no power person told me that it smoked and that his GF let the volume full when she powered off the amp and when he came to turn it on the sub played but then suddenly smoke was coming out, didn't say from where. So opened it up and saw a resistor made of metal (pic) but can't see any writing on metal par so what ever was written on it was burnt. So I'm kinda stuck here with this. I did ask for a repair or schematics in the other group section and waiting for this but I hope someone here might lend me a hand to try and identify...
                  Schem
                  4 Photos
                  10-03-2025, 02:18 PM
                • B0r1s
                  Samsung UE49KS7000SXXH - fast clicking sound in standby mode
                  by B0r1s
                  PSU - BN44-00878A

                  Symptoms:

                  The TV turned itself off, and I haven't been able to turn it back on. The standby voltage was unstable and lower than it should be.
                  A weak clicking sound was coming from the transformer.

                  Video with clicking sound:https://www.youtube.com/watch?v=lAduhjNtqCA

                  Progress:

                  After the transformer, I measured four Schottky diodes. DM862C and DM864C diodes readings were 003 in both directions. After detaching them from the circuit and measuring them, DM864C was the shorted one. These Schottky diodes are SB550.I...
                  01-17-2023, 04:58 PM
                • novak2
                  Panasonic th-42px60en plasma TV takes time to turn on and make clicking noises
                  by novak2
                  Hello there,

                  I recently bought a Panasonic th-42px60en plasma TV second hand. The problem is :
                  The TV takes time to turn on from cold (being unplugged from the night for example), it tries to turn on with the clicking sound, then shuts off, then retries and so on. The TV is still working, just it takes time to boot.

                  From what I've read it seems to be bad capacitors on the power board, but I just want to see if anyone had the same problem with this TV.

                  Thanks in advance.
                  09-25-2020, 02:34 PM
                • slimmy182
                  [SOLVED] M1 MacBook Pro clicking sound logic board 5V no power on A2338 820-02020
                  by slimmy182
                  Hello, I bought this Mac from a friend, he said that it simply stop working. The MacBook looks very clean but does not power on, stuck on 5v 0.42A, and sometimes display 5V and 0A (then 0.071A and again 0A).

                  I opened it looking for some problem, it was not touched before for sure and the board is very clena, no spot of corrosion at all from what I can see. Voltage on multimeter of the board off the case it's the same, 5V 0.42A. But then I noticed this "clicking sound" come from the board ( I attached here the audio file).

                  Looking on google I found this:...
                  01-14-2023, 11:55 AM
                • Loading...
                • No more items.
                Working...