Panasonic TX-P42C2l : No Power with 4 LED Blinks

[dulipra]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

grate. received ur msg aftr i replied. if you think the parts in that board are better than RS, then i'll buy that board.

[flocko]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

I have ? I use ES1G 400v 1 A I use these in all my repairs, you can buy them on ebay, but I get them from China 50x £2. I can put some in the post if you send me your address Flocko

[dulipra]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

thanks flocko; my address is

757 Altrincham Road
Manchester
M239BD

[tw2005]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

I have ? I use ES1G 400v 1 A I use these in all my repairs, you can buy them on ebay, but I get them from China 50x £2. I can put some in the post if you send me your address Flocko

Flocko to the rescue. you're a good fella

[flocko]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

He is a jolly good fella and so say all of us? yes no problem have not read all though, but am thinking SC + SS board repairs ,if you need driver chips M81735FP I have them also and most of the SMD parts for these repairs, I all ways keep a stock

[tw2005]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

He is a jolly good fella and so say all of us? yes no problem have not read all though, but am thinking SC + SS board repairs ,if you need driver chips M81735FP I have them also and most of the SMD parts for these repairs, I all ways keep a stock

I think this TNPA5105 is there after that diode. The thread title is misleading since he jumped on the end of a 42C2 4 blink where this is the S20 FHD entry level model with the reduced 5081 board essentially.

[flocko]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

I Know that a lot of these SC/SN repairs also have the TNPA 5072 SS blown , and you will be hard pushed to find the M81735FP IC over here in the UK.I have put two ES1G in the post to Manchester will be with you sometime next week. Flocko

[dulipra]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

Thanks flocko, you really rescued me send me your ebay link.
if you are happy, i can pay the cost if you can send a paypal invoice

[flocko]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

They only cost me about 5p so have them on me, just thank TW for putting the call out to me. Flocko

[dulipra]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

They only cost me about 5p so have them on me, just thank TW for putting the call out to me. Flocko

yes he is a great person. i learnt a lot from him. really thanking him for everything. let you know after fixed the TV. thanks

[dulipra]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

Done. It's working. TW2005 it's all because of you. Thank you very much.
Flocko thanks for the diodes. received it today.
thank you guys. cheers

[flocko]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

They took there time to get to you I posted them Sunday? Well done you are now a paid up member of the Panasonic TNPA SN/SC /SS repair club Flocko

[tw2005]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

Done. It's working. TW2005 it's all because of you. Thank you very much.
Flocko thanks for the diodes. received it today.
thank you guys. cheers

[tw2005]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

Done. It's working. TW2005 it's all because of you. Thank you very much.
Flocko thanks for the diodes. received it today.
thank you guys. cheers

If you have time, how about a new thread for this model and a summary of what was placed including part numbers of the originals and what parts were used to replace plus where you got them.

maybe a title similar to this

"Panasonic TX-P42S20B - 4 blinks - TNPA5105 failure / rebuild"

[dulipra]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

If you have time, how about a new thread for this model and a summary of what was placed including part numbers of the originals and what parts were used to replace plus where you got them.

maybe a title similar to this

"Panasonic TX-P42S20B - 4 blinks - TNPA5105 failure / rebuild"

No prob. i'll do that. i'm on my MBA project now. after finished that i'll do it.
thanks

[dulipra]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

They took there time to get to you I posted them Sunday? Well done you are now a paid up member of the Panasonic TNPA SN/SC /SS repair club Flocko

[dulipra]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

They took there time to get to you I posted them Sunday? Well done you are now a paid up member of the Panasonic TNPA SN/SC /SS repair club Flocko

[cichy_misiek]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

Hello I have a plasma TXP37C2E. One day the tv have not power and led are 4 blinks.
When I disconnect board SS (TNPA5072 AD) on connectors: SC3-SS3, P11-SS11, C23-SS23 - led 6 blinks.
On P11 I have 15V. When I check mm (diode mode) SS3 I see that is shorted on all directions.
In next step SC (TNPA 5062 AB) board is disconnected on P2-SC2 and SS3-SC3 - led 7 blinks.
In this place when I connectind SS boar only on P11-SS11, C23-SS23 (SC is disconnectd) - leds 4 blinks.
When I connect SC boar on P2-SC2 (SS3-SC3 are disconnected) - leds 4 blinks.
I thing that the SS board damaged, but I'm not sure.
Please help.

[tw2005]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

Hello I have a plasma TXP37C2E. One day the tv have not power and led are 4 blinks.
When I disconnect board SS (TNPA5072 AD) on connectors: SC3-SS3, P11-SS11, C23-SS23 - led 6 blinks.
On P11 I have 15V. When I check mm (diode mode) SS3 I see that is shorted on all directions.
In next step SC (TNPA 5062 AB) board is disconnected on P2-SC2 and SS3-SC3 - led 7 blinks.
In this place when I connectind SS boar only on P11-SS11, C23-SS23 (SC is disconnectd) - leds 4 blinks.
When I connect SC boar on P2-SC2 (SS3-SC3 are disconnected) - leds 4 blinks.
I thing that the SS board damaged, but I'm not sure.
Please help.

Yes, SS is shorted that's why 4 blink when connected and change to 6 disconnected. The SS can also damage the SN board so replacing the SS alone may not always fix.

[cichy_misiek]

Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks

I don't have SN board. Replace SS board or repair it? How do You thing?