got this tv for 10 bucks and when i first plugged it in, it worked fine for at least 6 hours. the next day it would not turn on at all. i dont even get the red standby light when plugged in. i see 165v at the main filter cap, but on CN3 where i should see some pins with 5v i only see a fluctuating voltage going from around 2.7v to around 3v.
i lifted the leg of what i thought was a diode to test if it was shorted but im thinking that cant actually be a diode because it doesnt have a stripe saying which side is which...and it says J3 not D something...is it just a jumper? why does it look like a diode without a stripe then?
still not psu savvy enough...what should i test?
i lifted the leg of what i thought was a diode to test if it was shorted but im thinking that cant actually be a diode because it doesnt have a stripe saying which side is which...and it says J3 not D something...is it just a jumper? why does it look like a diode without a stripe then?
still not psu savvy enough...what should i test?
Comment