Bonding machine

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jane
    Senior Member
    • Aug 2010
    • 188
    #1

    Bonding machine

    Hi,
    can anyone share his experience with a hotbar bonding machine he uses?
    I mean the machine that is used for repairing/replacing bad bonding tabs for instance or FPC( flexible printing circuit).
    Do you use a constant heating or a pulse heating machine?
    Thanks for sharing
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • waigy
      Portable fax machine thermal printer printing blocks of black with no text visible
      by waigy
      I just got a used possio greta portable fax machine.

      It uses thermal printing.

      Possio stopped support for these a while ago so I can't get spare parts for it.
      The print head is a ROHM KA2008-AF51B 0K300-35371 which I haven't been able to find online.

      I've attached an image of what the print looks like when printing any text.
      Any idea what causes this?
      I've cleaned the printer head, but it was already immaculate....
      05-05-2023, 01:55 PM
    • Document Archive
      ALIENWARE Steam Machine R2 i7-6700T Specification for Upgrade or Repair
      by Document Archive
      This specification for the ALIENWARE Steam Machine R2 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Steam Machine R2 boardview and Steam Machine R2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
      09-12-2024, 03:28 PM
    • CG2
      Janome DC3050 Sewing Machine Pedal Resistance
      by CG2
      OK, this is a long shot. I got this sewing machine cheap because it's end of line, ex-display, and had no pedal. The genuine pedal costs £60, while Ebay knock-offs go for around £15. So I went for the knock-off, it doesn't work, and I'm not sure whether it's the pedal or the sewing machine that has the problem.

      Now this is an electronic machine, unlike the old fashioned sort where the pedal was a big resistor in series with the power to the motor. Here, the pedal is just (I think) a variable resistor fed with a 5 volt supply, and limited to a current of 5 milliamps. Assuming that...
      04-14-2023, 07:53 AM
    • Soulzink
      Samsug washing machine. Power supply DC41-00189a board issue
      by Soulzink
      Hi everyone,

      I am trying to fix a samsung washinmachine power supply main board.
      I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
      Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
      The power supply board reference is the following: DC41-00189a
      I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel...
      04-19-2025, 06:26 AM
    • unimatrix93
      How to stabilize AC voltage to CNC machine
      by unimatrix93
      Hello there everybody, I'm not sure if it's the right topic to ask this but I hope so.


      I have a CNC machine wired to 3-phase 230V AC.

      It's a smaller CNC machine with a 3500W motor, do it does not uses much power.

      The problem is, when the residents come home and put load on the network, the voltage can drop to around 207V which is fine for most household items but by CNC machine stops working from this.

      I contacted the electricity company but they refuse to help me solve this problem.

      So I started to look around for some DIY...
      03-17-2025, 05:52 AM
    • Loading...
    • No more items.
    Working...