Hello all. I have an A board for a Panasonic tc-p50x3. That I believe is bad. The problem is I can't find the part tnph0911ac in stock anywhere. Does anyone know where I may could find it? I have found a site (moduslinkparts) that says they can repair it. Has anyone dealt with them? Would it be worth using them to try and repair my board? Thanks for any help!
-
-
Re: Moduslink parts reputable site?
If you perform a search on this site for "Moduslink", you can read other member's experiences with this company.Last edited by jetadm123; 09-03-2014, 10:22 AM. -
Re: Moduslink parts reputable site?
Their parts are pretty top quality stuff, BUT if you are in a hurry then don't use em. They take their time. took me almost a month to get a mainboard for a panny plasma that they said was in stock.
Other then the slow return they are pretty solid.Comment
-
Hi,
I have a serious problem to program the Z590 chipset SRAM with a Management Engine after replacing the chipset.
The new chipset is factory new and is not containing any Management Engine. Any attempts to program it into the chipset under Windows ends with a failure (eg. Error 20: Management Engine Device not present, or something similar).
Due to the lack of the ME several ports on the board, including all M.2 ports aren't working, booting OS works only on USB. So it's now other way, as to program the chipset with a ME.
Usually on ASUS boards it worked... -
The TV is a Samsung UN65JU67ODFXZA Version TD01. I replaced the power source board and the TV is now working, but I decided to try and troubleshoot the old board to fix at the component level. Trying to get a schematic and a parts list has proven to be an issue. Trying on my own, I can't tell you how many times my Norton security has flagged sites as "malicious". I ordered a service manual from ServiceManuals.net, paid $16.99 and got 66 pages of everything BUT schematics and component parts list! Can anyone steer me in the right direction? Some of the surface mounted component parts... -
I recently found myself the proud owner of a later-model Samsung plasma (the PN59D7000 for those keeping score at home) whose panel was, unfortunately, damaged in transport. I'm now preparing to part it out, but am curious as to whether or not any damage would have come to any of the components by attempting to power it up with the panel being broken. I read in one Avsforum thread (for whatever that's worth 😂) that the "scan driver boards" (by which I assume he means buffer boards) could be impacted by doing so. Is that actually the case? If so, since I don't intend on selling bad... -
Hi,
I have an Asus Rog Strix B360-I Gaming with missing parts. I know there is a resistor missing for sure, but nearby it seems there might have been also a transistor or mosfet. Below the picture of the area on the board with the missing parts. The interesting area is inside the rectangle.
I'd appeciate if somebody could make a detailled picture of this area from a working board and post it here. Getting the parts values would also be helpful. The revision of the board is 1.02 .
Thanks in advance... -
Hello to all.
may I have a question about these Semiconductor parts BQ24800RUYR? can it be replaced with these parts BQ24780SRUYR?
I need some good advice and also some information about it. thank you and God Bless...
Comment