Announcement

Collapse
No announcement yet.

Panasonic TC-P55VT60 12 blinking red lights

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Panasonic TC-P55VT60 12 blinking red lights

    Hello,

    Recently, my Panasonic plasma tv shut off on me and I'm getting the 12 blinking red lights. If I disconnect the power and reconnect it, it will work fine for about 15 minutes or so and then shut off again with the 12 blinks. From searching around a bit I've seen 2011 model tvs from Panasonic have the 12 blinks as meaning a bad A board. Is this correct for 2013 models as well?

    I'm not experienced with electronics and have never attempted a tv repair before, but my warranty was up a few weeks ago and I'm unsure how high the charges with be with a service center. I would like to consider fixing it myself if it's possible. Any help or advice is appreciated.

    Thanks,
    Josh

    #2
    Re: Panasonic TC-P55VT60 12 blinking red lights

    An intermittent 12 blink fault sounds quite likely to be an A board.
    Contact Panasonic. They have sometimes been known to allow for an extra month or two out of warranty.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      #3
      Re: Panasonic TC-P55VT60 12 blinking red lights

      Thanks. I will give Panasonic a call first and see if they're willing to fix it.

      Comment


        #4
        Re: Panasonic TC-P55VT60 12 blinking red lights

        Well it is a no go with Panasonic. My purchase date was a year and 5 weeks ago so they're unwilling to cover it. I guess I will now try replacing the A board to see if that works.

        Comment


          #5
          Re: Panasonic TC-P55VT60 12 blinking red lights

          I had the same problem with my panasonic TC-P65GT30 I had 12 blinks first take plug A11 from the A board and if the blinks go away and tv cuts off and on normal and then it is the speakers check the wire on the speaker to see if has bare wire which is causing a grd or sht either repair or repl if A Board still blinks after removing A11 repl Board

          Comment

          Working...
          X