Announcement

Collapse
No announcement yet.

Samsung UE55F8000SZ Turns on and off immediately

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung UE55F8000SZ Turns on and off immediately

    good morning, I have a samsung UE55F8000SZ tv that turns on, shows the logo and turns off after 1-2 seconds.
    This defect happens continuously, hearing the classic click of the relay every time.

    Power supply board BN44-00636B

    disconnecting the mains and lamps from the power board always causes the same problem.
    Is it normal that without anything connected this power supply turns on and off cyclically?
    any suggestions on what to check?

    thanks in advance

    #2
    A common problem with these power supplies is a faulty led driver SLC1013M.
    Attached Files

    Comment


      #3
      Yes, if you wish and have time, try to completely resolder it / them (new tin)..

      Comment


        #4
        thanks, I'll try to change the integrated circuit and let you know

        Comment


          #5
          I mean NOT CHANGING THE CHIP!

          Comment


            #6
            I tried to redo all the soldering but nothing. In the end I solved it by changing IC SLC1013M and SLC2013M. Thanks to everyone for the help

            Comment


              #7
              Originally posted by Egidio85 View Post
              I tried to redo all the soldering but nothing. In the end I solved it by changing IC SLC1013M and SLC2013M. Thanks to everyone for the help
              Ok! As I suggested, but someone didn't believe me...

              Comment


                #8
                the thing that it worked for seconds sounded me strange, i'm not here to bother someone but to help and learn.. i have clues that let me thinked of a faulty soldering, stop..

                Comment


                  #9
                  Originally posted by Davi.p View Post
                  the thing that it worked for seconds sounded me strange, i'm not here to bother someone but to help and learn.. i have clues that let me thinked of a faulty soldering, stop..
                  My opinion is this is wrong.

                  Comment

                  Working...
                  X