BN44-00468A diagram needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jaringa
    New Member
    • Jun 2014
    • 3
    • philippines

    #1

    BN44-00468A diagram needed

    good day!

    need your help guys,

    need the schematic of bn44-00468a powersupply inverter.

    the promblem of the board is no light

    High fet - 0v
    low fet - 0v
    13v present

    after trying to repair

    now the 13v gone and the unit become stanby, i find out that the QM854 was become shorted,

    can anyone give me this diagram or give me a hint?

    im new in repairing

    TIA
  • jaringa
    New Member
    • Jun 2014
    • 3
    • philippines

    #2
    Re: BN44-00468A diagram needed

    update...

    ill replaced QM854 to 2n3906 (pnp) now the unit has 13v again, ill test later.

    Comment

    • LE GRAND
      Member
      • Jul 2014
      • 34
      • TUNISIA

      #3
      Re: BN44-00468A diagram needed

      SO whats is up

      Comment

      • nilanka456
        New Member
        • Jul 2014
        • 3
        • sri lanka

        #4
        Re: BN44-00468A diagram needed

        i also needed it...help us

        Comment

        • nilanka456
          New Member
          • Jul 2014
          • 3
          • sri lanka

          #5
          Re: BN44-00468A diagram needed

          i need this location value BN44-00468A. R1829,R1842,R1841,R1845,R1846 ti"s burn out location of invertr area..

          Comment

          • nilanka456
            New Member
            • Jul 2014
            • 3
            • sri lanka

            #6
            Re: BN44-00468A diagram needed

            if you can give me this location value R1829,R1842,R1841,R1845,R1846 plz

            Comment

            • jagiasi_m
              New Member
              • Oct 2015
              • 1
              • India

              #7
              Re: BN44-00468A diagram needed

              Need details of 2 mosfets of invertor , 2 Transistors connected to gate and also 2 diodes connected to gate of mosfets

              Comment

              • Nemo1956
                New Member
                • Jan 2017
                • 5
                • Thailand

                #8
                Re: BN44-00468A diagram needed

                I have one of these power suppliers as well but it's seems to be making the picture go out of sync. Im not sure if it is the PSU but I have replaced all the electrolytic capacitors with no effect change.
                Can anyone let me know if this is a stranded problem and how to fix it.
                Thanks
                Nemo

                Comment

                • vinceroger69
                  Badcaps Legend
                  • Mar 2012
                  • 6714
                  • uk

                  #9
                  Re: BN44-00468A diagram needed

                  Originally posted by Nemo1956
                  I have one of these power suppliers as well but it's seems to be making the picture go out of sync. Im not sure if it is the PSU but I have replaced all the electrolytic capacitors with no effect change.
                  Can anyone let me know if this is a stranded problem and how to fix it.
                  Thanks
                  Nemo
                  Maybe best to start a new thread include your model number etc and add a picture of the back of the tv showing how all the boards are connected and a picture of each board thats used in your set please make them as clear as possible as we go of the information/pictures you provide.

                  Comment

                  Related Topics

                  Collapse

                  • Chapita
                    Dell latitude 5289 schematic diagram a d board view needed
                    by Chapita
                    Hi friends, anyone to assist with the schematic diagram and boardview for dell latitude 5289 with board number CAZ LA-E111P....
                    09-15-2024, 03:18 AM
                  • businessmind1988
                    HP CQ61 SCEHMATIC DIAGRAM NEEDED
                    by businessmind1988
                    please i need schematic for HP CQ61

                    mobo number DA00P8MB6D1 REV
                    09-28-2024, 07:59 AM
                  • hs5424
                    Dynacord powermate 1600 block diagram.
                    by hs5424
                    Hi All,
                    I obtained a schematic diagram for the above mixer but I am wondering if a block diagram exists as I am trying to fix a problem in the protection circuit which I find a little confusing using a circuit diagram only. In the good old days the workshop manuals always had a block diagram with a circuit discription. Very useful for fault finding.
                    The protection light is perminently on. The right sode has a -80DC on the feed to the speaker, hence the protection led on. I have removed all the O/P transistors which checked out OK. I tested all other transistors in circuit which seem...
                    07-31-2025, 01:35 PM
                  • Techmanx
                    Schematic Diagram Needed
                    by Techmanx
                    I have a Yorkville Audiopro 208 Performance Mixer (full name on device - 8 channels, non-powered). Not only can I not locate schematics for this, I cannot find a user manual, a picture or any reference whatsoever to this mixer on the entire internet and I have looked really hard. Not a single mention anywhere. It's like it never existed, yet it does. I have been sourcing schematics for decades but have never run into to this before. In this day and age, how is this even possible?

                    It appears to have the same mixer stage as the Audiopro model 508 but this unit has a built in power...
                    07-05-2023, 01:41 PM
                  • gabri2211
                    I'm looking for the wiring diagram for led monitor model DHI-LM19-L200
                    by gabri2211
                    hello everyone, I'm looking for the wiring diagram of this led monitor.
                    the model is DHI-LM19-L200, but I think that any other diagram of a DAHUA monitor could be equivalent.
                    I really hope that among you someone can help me to repair this monitor, the screen is black, it doesn't seem like a backlight problem.
                    I see the presence of 12 volts, 5 volts, but without a diagram the repair is very difficult.
                    thanks to those who will answer
                    12-10-2024, 04:37 PM
                  • Loading...
                  • No more items.
                  Working...