Sanyo dp47840 No Standby Voltage

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • philliesfan30m
    Badcaps Veteran
    • Aug 2013
    • 542
    • USA
    #21
    Re: Sanyo dp47840 No Standby Voltage

    i didn't have the jumper all the way in. when i jumper the pson and 5vstb i get all the voltages but no backlights or the standby led or power led. and the line off is still at 2.3 volts but i have no idea what that is for. can someone explain what the line off is and if that might be where the problem is?

      Comment

      • philliesfan30m
        Badcaps Veteran
        • Aug 2013
        • 542
        • USA
        #22
        Re: Sanyo dp47840 No Standby Voltage

        any help?

          Comment

          • philliesfan30m
            Badcaps Veteran
            • Aug 2013
            • 542
            • USA
            #23
            Re: Sanyo dp47840 No Standby Voltage

            found a bad voltage reg. on the analog board replaced it and now i have all the voltages as soon as i plug it in i now have 3.3v on the line off whatever that is. and 2.7v on the pson all the time. but still no signs of life at all. any ideas?

              Comment

              • philliesfan30m
                Badcaps Veteran
                • Aug 2013
                • 542
                • USA
                #24
                Re: Sanyo dp47840 No Standby Voltage

                anyone?

                  Comment

                  Previous 1 2 template Next

                  Related Topics

                  Collapse
                  • Tynan Dill
                    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                    by Tynan Dill
                    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                    Upon bringing it home and plugging it up, it showed a standby light.

                    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                    The screen seems to blackout and stay black, but with a flashlight I can see the display.

                    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                    Assuming...
                    ORIGINAL POWER SUPPLY BOARD
                    7 Photos
                    11-22-2024, 01:46 PM
                  • x_orange90_x
                    Samsung UN55KU6300F no standby voltage
                    by x_orange90_x
                    I have no standby indicator light and no light on the optical port. I checked the standby voltage on the two mosfets in the top left and they both read 30mV. I checked the fuse and it has continuity. I also checked the voltage on the two large 450v caps they both read 153v. All of these voltages are the same with and without the main board connected as well as with backlights connected/disconnected.

                    Nothing looks obvious like a burned ceramic disc cap or bulged electrolytic. No burned resistors, diodes, or anything like that....
                    05-21-2025, 09:59 PM
                  • Bad_IC
                    Philips TV 37pfl5604h/12 no standby voltage
                    by Bad_IC


                    Hello,
                    I have a problem with this TV, the standby voltage is not present. I have checked the components around the IC fsq510's area and they seem to work, also replaced this IC but the problem persists.
                    These are the voltages in some pins of IC fsq510:
                    Vcc=18v
                    D=320v
                    Vstr=154v
                    Unfortunately, I couldn't find the schematic
                    What else could I check?
                    Is it possible to provide standby voltage from an external source to allow the TV to turn on?
                    Thank you​...
                    11-08-2024, 01:07 PM
                  • brock-s
                    Asus GL503GE 3.3 standby voltage low
                    by brock-s
                    An Asus GL503GE laptop arrived that had had a screw dropped on the motherboard while the battery was connected. This resulted in a physical damage to the 3.3v / 5v voltage controller RT6575DGQW (pu28 on schematic, page 40). Additionally, the trace to pin 12 (VIN 19v supply) was burnt.

                    Replaced the RT6575DGQW with a new one, repaired the damaged trace. Only getting 0.7V instead of the expected 3.3v standby voltage (3V_S5 on schematic).

                    Replaced the AON7408 PQ60 mosfet from a donor board as resistance was low on the gate (I did not write this value down, as I optimistically...
                    07-13-2023, 03:43 PM
                  • reessi
                    JSK4228-050 Power Supply Standby voltage changing! (Possible from Wharfedale LTF37K1)
                    by reessi
                    Hello,

                    I am trying to re-purpose this power supply that I saved years ago from a tv with a cracked screen for a monitor but that is not really that relevent at the moment. I do not recall which tv but a google search looks like it is from Wharfedale LTF37K1.

                    You may notice I made some alterations moving some components to the top and some wires which are from a 5v regulator I fitted to the 12v output as the monitor requires 5v. The standby was already at fault from the beginning, it has nothing to do with the alterations...

                    Years ago it had some bulging caps...
                    04-26-2021, 11:42 AM
                  • Loading...
                  • No more items.
                  Working...