Panasonic Plasma T.V TH-42p

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sathya79
    New Member
    • Jun 2014
    • 2
    • Sri Lanka
    #1

    Panasonic Plasma T.V TH-42p

    Hi

    Good I found this forum. Hope I can resolve my issue here with my Panasonic Plasma T.V (TH-42p..)

    On my Plasma T.V screen all of the sudden I can see Red or green pixels along with the image. there is no specific time or frequency for these pixels to appear. Some times it comes continuously all over the screen (along with the picture in the background) for about 30 sec and suddenly gets a clear picture and the same continues. But some times the picture is clear without any pixel issue for several hours.

    Is that a voltage issue or Aged screen? Your inputs please.
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Panasonic Plasma T.V TH-42p

      Full model #? Printed on the back of the set.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Tr0ll
          T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
          by Tr0ll
          Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

          The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

          Original T-con:
          Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

          First replacement T-con:

          I thought it might be t-con and ordered new t-con from china(supposedly tested)...
          10-07-2023, 07:48 PM
        • CyberPhoenix
          Issue with picture quality of Sony bravia TV
          by CyberPhoenix
          Hello, Last week I bought the 50" Sony X80j tv everything was working fine, untill I plugged the tv in a ups power supply 650va the tv remote control became unresponsive and the TV became laggy after a while the picture quality isn't the same as before the tv seems less brighter and the picture is somehow blurry, people's faces don't look as natural as before, there is a mini orange-pink tint to the edge of people's faces especially in NETFLIX Dolby Vision like in One Piece ep1 Alvida skin tone, my intention was to protect the tv but something went wrong I checked the ups with a multimeter,...
          Badcaps Electronics Repair Forum & Schematic Search - Badcaps
          https://www.badcaps.net
          01-22-2024, 02:08 AM
        • lordultima
          Panasonic Plasma TV, TH-42PX60U, strange issue with picture
          by lordultima
          PanasonicTV, TH-42PX60U turns on as it normally would with picture and audio displaying correctly. After 30-60 minutes of watching TV, the screen goes dark with audio/sound working.
          I don't have a voltmeter to check the voltages and that's why I thought I'd ask before if anyone knew what would could be causing it. I pulled the back cover and removed as much dust fom the boards and the vents as well. The backlight seems to be working properly because the TV turns on and a picture displays on the screen. Any suggestions would be helpful.

          I took some pictures of the back with...
          10-10-2020, 08:21 AM
        • jm1234
          Panasonic plasma TX-P42ST50 - 6 blinks
          by jm1234
          Hi,
          anyone able to provide the service manual for old plasma Panasonic TX-P42ST50E?
          It turns off almost immediately (0~5 seconds after pressing the on/off button) and starts flashing the red diode 6 times.
          I disconnected the left-hand side board (SC?, both the ribbon cable and the power cable to it) and also another ribbon going to bottom left board. Then the led signal is 8 flashes. According to service guide to another Panasonic plasma it would mean the left-hand side board is faulty. But I'm not sure it 100% applies to my model.
          I checked that board for any obvious faults...
          05-22-2024, 06:59 AM
        • stecos
          Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
          by stecos
          Hi everyone!
          I happened several times, in the search for help from the web, to consult this very interesting forum.
          So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

          Having said that I come to the gist of my post on the forum as the title suggests.
          For my passion for technology I'm now collecting several...
          11-28-2022, 11:39 AM
        • Loading...
        • No more items.
        Working...