Hello everyone!
I am the owner of a Samsung LE22B450C4W LCD TV, and recently i decided to install the last firmware update on it.
I downloaded the firmware and copied it to a USB stick which i plugged on the TV, and after that i begun the update. Everything was going perfect with the progress bar filling, when suddenly on 89% the progress stopped.
I waited about an hour. Nothing. Stuck in 89%. And then i made the stupid move to unplug the USB, wondering if something would cancel the progress, but even though the USB was off nothing changed, frozen screen.
The second stupid move of the day was to unplug the power cord and plug it in again, and from there the hell begins...
The TV is not turning on, no sound, no picture, just the red light on the bottom right of the screen which does the following:
a) When the screen is on StandBy it remains on.
b) When the power on button is pressed from the remote it blinks 4 times and the light turns and remains off (i think that this was the power on usual blinking).
Let me underline that the TV's buttons (power, source etc.) don't work at all, the red light is reacting only via remote control.
As i can suspect i did a HUGE mistake and now the firmware does not work and the TV can be turned on??
I tried every method to go into service mode from here:
http://www.factory-reset.com/wiki/Samsung_Service_Menu
but nothing happened, even on blind mode..
If someone could help me with my problem would be great, i am desperate right now..
Thanks in advance.
I am the owner of a Samsung LE22B450C4W LCD TV, and recently i decided to install the last firmware update on it.
I downloaded the firmware and copied it to a USB stick which i plugged on the TV, and after that i begun the update. Everything was going perfect with the progress bar filling, when suddenly on 89% the progress stopped.
I waited about an hour. Nothing. Stuck in 89%. And then i made the stupid move to unplug the USB, wondering if something would cancel the progress, but even though the USB was off nothing changed, frozen screen.
The second stupid move of the day was to unplug the power cord and plug it in again, and from there the hell begins...
The TV is not turning on, no sound, no picture, just the red light on the bottom right of the screen which does the following:
a) When the screen is on StandBy it remains on.
b) When the power on button is pressed from the remote it blinks 4 times and the light turns and remains off (i think that this was the power on usual blinking).
Let me underline that the TV's buttons (power, source etc.) don't work at all, the red light is reacting only via remote control.
As i can suspect i did a HUGE mistake and now the firmware does not work and the TV can be turned on??
I tried every method to go into service mode from here:
http://www.factory-reset.com/wiki/Samsung_Service_Menu
but nothing happened, even on blind mode..
If someone could help me with my problem would be great, i am desperate right now..
Thanks in advance.
