Announcement

Collapse
No announcement yet.

LG 50PJ350 - Not turning on, clicking noise

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    LG 50PJ350 - Not turning on, clicking noise

    Ok guys, I've got an LG 50PJ350 plasma here which has intermittent issues with turning on. At times it will turn on, work fine for a few hours and then after I turn it off and leave it for a few hours it won't turn on again. It makes a clicking sound, the standby light goes off but the screen doesn't come on. It then clicks a few more times and the standby light comes back on.

    I ordered and fitted a repair kit which replaced a regulator IC, fuse, diode, 3 capacitors and a couple of resistors (kit here) however there has been no change and the problems persist. Just wandering if you guys would be able to provide any assistance in diagnosing the problem.

    Thanks in advance

    #2
    Re: LG 50PJ350 - Not turning on, clicking noise

    Had a better look at the board and it turns out there was a bad solder joint. Repaired it and now it seems to be working fine.

    Comment

    Working...
    X