Common Caps To Have On Hand

[Michale32086]

Are there common capacitors for LCD/LED/Plasma TV repair?

I am wanting to order a lot of caps to have on hand for repair jobs. I was just wondering if there are common values to have or if it's just a crap shoot as far as types of capacitors go.

Thanx

[1supertech]

Re: Common Caps To Have On Hand

Make a list of what ever capacitance value and voltage of each cap you see on power supplies and mainboards and buy as needed that's how I started with monitor repair.

[Alastair E]

Re: Common Caps To Have On Hand

1000uF 35V, 2,200uF 25v, 3,300uF 10v 4,700uf 6.3v

330uF 35V 220uf 35V 100uF 50V, 47uF 50v 22uF 63V 10uF 63v, 4.7uF 63v 2.2uF 100v, 1uF 100v.
--For TV sets, recommend Rubycon ZL/YXF or Nichicon PM or PS

That little list is a good starting point--You'll build on it as you progress and specific sets in your area will use certain values more than others....

[Michale32086]

Re: Common Caps To Have On Hand

Both awesome suggestions.

Many thanx

[Ltank]

Re: Common Caps To Have On Hand

I have a big variety of capacitor values and voltages. Be aware of lead size for through holes on the electrolitic caps. They vary a bit as does the lead spacing, diameter and height when dealing with tight places. I bought a SMD Electrolitic kit but have never used a single one.