Re: samsung 50 inch plasma
80794. Wr4500
80794. Wr4500
-
-
Re: samsung 50 inch plasma
Can't find anything on that - are you sure?
Yes that's how you test across from Vsc to Vsch which should give 130V to 150V or so.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: samsung 50 inch plasma
That's from 161v to 30v ishComment
-
Re: samsung 50 inch plasma
Sorry 80794 mr4500Comment
-
Re: samsung 50 inch plasma
OK so it looks like the fault is with that IC or with a startup capacitor.
Would need that IC part # definitively confirmed to indicate how to test, that part # provided brings no results.
I think it's an ON SEMI part in a TO-220-7 package.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: samsung 50 inch plasma
Put number aboveComment
-
Re: samsung 50 inch plasma
SHINDENGEN MR4500
(mostly in Chinese...)
See if you can check pin 4 voltage, with the negative lead on the chassis and positive lead on the pin. Pins are numbered from the left of the device side with part# on it.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: samsung 50 inch plasma
0.24v off pin 4 from left to rightComment
-
Re: samsung 50 inch plasma
How sure are you about that? Pin 4 connects to C5058.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: samsung 50 inch plasma
Yes definitely sureComment
-
Re: samsung 50 inch plasma
What voltage do you measure across C5058, the little capacitor next to the IC?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: samsung 50 inch plasma
Ether side -0.25v up and downComment
-
Re: samsung 50 inch plasma
It would appear that IC is defective then, this could cause your issue.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: samsung 50 inch plasma
I might have a look if I have any I have on other boards I can try in itComment
-
Re: samsung 50 inch plasma
Real-Time tech support. Hat off to you, tom.Comment
-
Re: samsung 50 inch plasma
Tom any idea where I can get one of them ic'sComment
-
Re: samsung 50 inch plasma
eBay?
http://www.ebay.co.uk/sch/i.html?_tr...at=0&_from=R40
MR4520 might work, not certain as no English datasheet available.
Probably should check some other things before ordering a £30 IC... that's a crazy price.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: samsung 50 inch plasma
Does Google translate not change the languageComment
-
Re: samsung 50 inch plasma
Not really much good for technical documents! Machine language translation is too far behind to make good sense of stuff like that.
...good luck!Part of the resonance
Part of the resonant operation ni Yori high efficiency Low Bruno Sui ズ of を Actual cash
Pressure-resistant high-speed 900V IGBT を use (MR40XX Silysia ー ズ)
100V · 200V · W / W power supply into force で big ni Outward Applied possible.
Stand-by Outward Applied ((ハ Buses ゙ ー strike lacing lacing strike Suites ー ド ゙))
Standby Reduction na ni effective strike lacing perfect ー ド Kirikae function を deployment.
Starting circuit built-ni Yori But do not start to resist
After starting は を starter circuit breaker, starter circuit losses を で Full Reduction
ソ gift Suites Suites Suites ド ゙ ソ gift gift ra ra Sui Sui sleeve ゙ loop circuit ni ni Yori Yori whispered su Bruno Bruno Sui Sui ズ ゙ Sinochem を を Actual cashPlease do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: samsung 50 inch plasma
Ahhh I see lolComment
-
Hello everyone,
I got a Samsung The Frame 55 inch TV for free from uncle cause it is not turning on anymore. I am in the second year of training as an electrician so I have knowledge already but I am far away from to be a pro.
The TV has Standby but ist not turning on. A Friend of mine owns a 50 inch Frame TV so I checked the One Connect Box and the One Connect Cable there. Both are good and working normally. I have opened the TV case and measured some voltages on the Board.
What I already found is that the 12.8V are not an the connector to the main board connector to the power... -
Hello . I have a problem with a samsung plasma tv stuck in bootloop . The TV is Samsung PS51D6900DS plasma smart tv .Need help if anyone have any suggestions
Thanks a lot !! -
Hello,
I am having Samsung PS51E550 Plasma TV. While the TV was working, a crackling sound heard & video went off with audio still ON. After switching it off & ON, the red LED on TV blinks six times & then off.
Opened TV cover & observed foll
a) Green LED on the small PCB blinks at @5-6sec ON & off for 3-4 secs. Red LED on logic board ON
b)Vs & Va on power supply board raises momentarily to 209v & 58v resp & then drops.
c) Cold test on Y-main board shows all 3 pins of FGPF4536 IGBT short to Grnd.
How to confirm Y -Buffer board... -
Hello, I have a Samsung Plasma TV - Model # PN43D450A2D
This was my parents TV and the initial symptoms were that the display was hard to turn on with the display making various clicking noises until one day it would not turn on anymore.
I took a look and found a couple 1000uF capacitors (i believe on the low voltage size) that had leaked out their electrolyte and did not test well on a tester. I replaced them but still no dice.
When the TV is plugged in, there is no clicking, LED status lights (on PCB boards or the front display) and the power on button... -
This is my first posting, so forgive me everyone in advance if I made mistake(s) in my posting.
I know there have been much about this plama tv already and I have read through most what I could find. However; I still have not come across any service lit/schematics for this tv. I even looked for the 50PS11 which would be basically relevant other than display size. Anyone know to find the documentation would greatly be appreciated.
The set that I have has issues with lower third of screen being dimmer than the above portion. From my past experiences with tube, solid state,...
Comment