samsung 50 inch plasma

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • adamp91gvm
    Badcaps Veteran
    • Jan 2014
    • 699
    • uk

    #1

    samsung 50 inch plasma

    It's a plasma ps50b451b2wxxu it had a line down the screen but I have got it back on as u can see on the pics it's like a image burn any idea how to get rid of it also the v scan is up and down I have checked vs and va and there spot on
    Attached Files
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: samsung 50 inch plasma

    I'd look at that Vscan part closely, try adjusting it, if that is bad, this very effect can sometimes be observed.
    What does Vscan measure?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • adamp91gvm
      Badcaps Veteran
      • Jan 2014
      • 699
      • uk

      #3
      Re: samsung 50 inch plasma

      It goes up and down not a constant

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: samsung 50 inch plasma

        Range of values?
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • adamp91gvm
          Badcaps Veteran
          • Jan 2014
          • 699
          • uk

          #5
          Re: samsung 50 inch plasma

          17 to 203

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #6
            Re: samsung 50 inch plasma

            Well that's no good at all then. Pic of Y-main?
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • adamp91gvm
              Badcaps Veteran
              • Jan 2014
              • 699
              • uk

              #7
              Re: samsung 50 inch plasma

              That's It
              Attached Files

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #8
                Re: samsung 50 inch plasma

                Can you get a closer shot around that yellow transformer? Top left of board from your pic.
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • adamp91gvm
                  Badcaps Veteran
                  • Jan 2014
                  • 699
                  • uk

                  #9
                  Re: samsung 50 inch plasma

                  That ok ?
                  Attached Files

                  Comment

                  • tom66
                    EVs Rule
                    • Apr 2011
                    • 32560
                    • UK

                    #10
                    Re: samsung 50 inch plasma

                    OK, so what's the voltage on Vsch, varying too? And the part # of ringed IC?
                    Measure Vsch to ground/chassis and also Vsch to -Vsc; for Vsch to -Vsc it should measure 130V to 150V.
                    Attached Files
                    Last edited by tom66; 03-02-2014, 02:50 PM.
                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    • adamp91gvm
                      Badcaps Veteran
                      • Jan 2014
                      • 699
                      • uk

                      #11
                      Re: samsung 50 inch plasma

                      Out of the top rod as u look at it 205v next down 15.4v and the lowest nothin

                      Comment

                      • tom66
                        EVs Rule
                        • Apr 2011
                        • 32560
                        • UK

                        #12
                        Re: samsung 50 inch plasma

                        What?

                        Test Vsch to ground, then Vsch to Vsc. Only test those two. Also part # of highlighted device - not pin voltages for now...
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                        • adamp91gvm
                          Badcaps Veteran
                          • Jan 2014
                          • 699
                          • uk

                          #13
                          Re: samsung 50 inch plasma

                          The transistor you circled

                          Comment

                          • tom66
                            EVs Rule
                            • Apr 2011
                            • 32560
                            • UK

                            #14
                            Re: samsung 50 inch plasma

                            Just need the part # of that.
                            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                            Comment

                            • adamp91gvm
                              Badcaps Veteran
                              • Jan 2014
                              • 699
                              • uk

                              #15
                              Re: samsung 50 inch plasma

                              Vsc is -0.25 to 0v

                              Comment

                              • adamp91gvm
                                Badcaps Veteran
                                • Jan 2014
                                • 699
                                • uk

                                #16
                                Re: samsung 50 inch plasma

                                That's the part number
                                Attached Files

                                Comment

                                • adamp91gvm
                                  Badcaps Veteran
                                  • Jan 2014
                                  • 699
                                  • uk

                                  #17
                                  Re: samsung 50 inch plasma

                                  I can not find the vsc

                                  Comment

                                  • tom66
                                    EVs Rule
                                    • Apr 2011
                                    • 32560
                                    • UK

                                    #18
                                    Re: samsung 50 inch plasma

                                    Vsc = Vscan
                                    Vsch not same as Vsc
                                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                    Comment

                                    • tom66
                                      EVs Rule
                                      • Apr 2011
                                      • 32560
                                      • UK

                                      #19
                                      Re: samsung 50 inch plasma

                                      Can't read that part #, please read it off.
                                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                      Comment

                                      • adamp91gvm
                                        Badcaps Veteran
                                        • Jan 2014
                                        • 699
                                        • uk

                                        #20
                                        Re: samsung 50 inch plasma

                                        Ahh so just red or black to vsc and red or black to vsch

                                        Comment

                                        Related Topics

                                        Collapse

                                        • ChristianBr01
                                          LED TV Samsung The Frame 55 inch QE55LS03RAU Standby Light only
                                          by ChristianBr01
                                          Hello everyone,
                                          I got a Samsung The Frame 55 inch TV for free from uncle cause it is not turning on anymore. I am in the second year of training as an electrician so I have knowledge already but I am far away from to be a pro.
                                          The TV has Standby but ist not turning on. A Friend of mine owns a 50 inch Frame TV so I checked the One Connect Box and the One Connect Cable there. Both are good and working normally. I have opened the TV case and measured some voltages on the Board.
                                          What I already found is that the 12.8V are not an the connector to the main board connector to the power...
                                          04-23-2025, 01:48 AM
                                        • porfyriadhs
                                          Samsung Plasma PS51D6900DS Bootloop
                                          by porfyriadhs
                                          Hello . I have a problem with a samsung plasma tv stuck in bootloop . The TV is Samsung PS51D6900DS plasma smart tv .Need help if anyone have any suggestions
                                          Thanks a lot !!
                                          10-19-2023, 11:31 AM
                                        • ArMaaN376
                                          Samsung PS51E550 Plasma TV
                                          by ArMaaN376
                                          Hello,
                                          I am having Samsung PS51E550 Plasma TV. While the TV was working, a crackling sound heard & video went off with audio still ON. After switching it off & ON, the red LED on TV blinks six times & then off.
                                          Opened TV cover & observed foll
                                          a) Green LED on the small PCB blinks at @5-6sec ON & off for 3-4 secs. Red LED on logic board ON
                                          b)Vs & Va on power supply board raises momentarily to 209v & 58v resp & then drops.
                                          c) Cold test on Y-main board shows all 3 pins of FGPF4536 IGBT short to Grnd.
                                          How to confirm Y -Buffer board...
                                          06-19-2024, 04:05 AM
                                        • CDNBrewer
                                          Samsung Plasma PN43D450A2D No Power
                                          by CDNBrewer
                                          Hello, I have a Samsung Plasma TV - Model # PN43D450A2D

                                          This was my parents TV and the initial symptoms were that the display was hard to turn on with the display making various clicking noises until one day it would not turn on anymore.

                                          I took a look and found a couple 1000uF capacitors (i believe on the low voltage size) that had leaked out their electrolyte and did not test well on a tester. I replaced them but still no dice.

                                          When the TV is plugged in, there is no clicking, LED status lights (on PCB boards or the front display) and the power on button...
                                          03-02-2025, 04:59 PM
                                        • xrey
                                          Samsung Plasma PN58B860Y2F low vscan
                                          by xrey
                                          We all of the sudden started getting a washed out picture and rainbow colored static/snow.

                                          When we tested vscan, etc., everything measured properly but not the vscan.

                                          Supposed to be -193 got -93 (tested it w the TV on)

                                          Researched it and decided to replace the y board and y buffers.

                                          Now I get no picture or sound - TV turns on but nothing else.

                                          When I run the same tests I am still getting -93 on the vscan test and this is now a different Y board, buffers, etc.

                                          So I am thinking either I did something wrong originally in...
                                          10-18-2020, 11:21 AM
                                        • Loading...
                                        • No more items.
                                        Working...