Hello dear friends. I have problem with a Samsung UE32EH4000W. The tv starts with good Colour quality and after a while the colour changes. Anyone can help me please
-
Fixed a 9 year old UN55JU650 by replacing backlight. Original backlight LED was still working after 27k! hours but terrible picture of course. Few LEDs were out, 5-6 lens fell off (bright white spots) and another few popped off with slightest force. Surviving LEDs were all slightly blue so picture has a blue tint.
This TV runs older Tizen OS (updated to latest version, see pic) and have problems with network (wifi or ethernet) connection. The Tizen UI frequently switch to coax input source while changing content sources. . If no good signal (coax not connected, no prior antenna/cable... -
Hi everyone so sorry my bad english Im hungarian
so I have a few samsung qe50q60tau and I trying to repair t con problem, I have a 100% working main board 100% working psu for the tv for another tv I replace them boards for the wrong tv and the problem was same so the problem not the main board and not the psu, the back light is working
I turn on the tv the qled logo is blinking turn on and off the tv I tried to tape the t con cable and I found the right pin for the tv is stable turned on but no picture, no qled picture only back light and not arrive the currrent for the t con board... -
Hi I need help with a Samsung un43nu7100 BN94-13191C/BN41-02635A with boot loop problem even with tcon jumper.
I've already try tape method and same happen, if I disconnect both flex from mainboard to panel tv boots normal even I hear Samsung sound.
When I solder jumper to make t-con work with or without panel or panel cables connected it still reboot or power cycling.
What I noticed is that there's no voltage in VHG, HAVDD, PANEL_3.3V, AVDD_17V or 12v near dc-dc chip.
I check capacitors and diodes and didn't find any short IN MAINBOARD.
Measured all power supply... -
Hello,
I'm experiencing an issue with my Samsung LN52A550P3FXZA. Upon powering it up, I initially see a ghosting effect in the background along with some slight red pixelation in certain areas. This then shifts to green pixelation in the black areas. The picture quality fluctuates with noise for about the first thirty minutes before it eventually clears up. I suspect the T-con board might be the culprit, but I'm also concerned that there could be a problem related to my previous repair. When I turn it on, I hear a click, and the red LED light flashes three times before the screen comes on.... -
hello guys, i'm having problem with this laptop, the board is a BA41-02206A
I know this same part number came in the 14' and 15' version... so this is when the problem starts... I bought a used board from a 15" laptop, since is the same part number, I tought is just change the bios and it will work on a 14" but
I already flashed 20+ bios archives of NP270E4E (E4E is 14" and E5E is 15"), but the keyboard dont match the keys, for example, when I press "A" the windows recognize " ' ", when I press "L" the windows recognize...
Comment