lg55lw4500 funny lines after corrosion to driver board

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wreksta
    Badcaps Veteran
    • Aug 2013
    • 508
    • england
    #1

    lg55lw4500 funny lines after corrosion to driver board

    Hi again just bought this for 40 pounds it has had water damage on the lcd driver board

    I have cleaned up the corrosion and removed all bad smt caps but need to know where I can get same to replace as the ribbons have no burns etc the screen has a big think stripe thats brighter than rest of the screen with fuzziness

    im hoping it just needs the caps replaced

    any ideas




    Last edited by wreksta; 02-16-2014, 10:40 AM.
    Tags: None
    • wreksta
      Badcaps Veteran
      • Aug 2013
      • 508
      • england
      #2
      Re: lg55lw4500 funny lines after corrosion to driver board

      any ideas

      pics as they had problem displaying




        Comment

        • johnboy1313
          Badcaps Legend
          • Nov 2012
          • 1959
          • USA
          #3
          Re: lg55lw4500 funny lines after corrosion to driver board

          You've been here long enough to know that last picture is no good. We can't help if we can't see anything.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • howardc64
              TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
              by howardc64
              All left and right refers to looking from rear of TV (or looking from front with TV upside down)
              • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
              • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
              ...
              07-24-2025, 05:17 PM
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              ORIGINAL POWER SUPPLY BOARD
              7 Photos
              11-22-2024, 01:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • fredtred
              Physically bending the T-Con board creates horizontal dotted lines on OLED55CXPUA
              by fredtred
              Hello!
              I have been trying to solve this issue the past 12 months to no avail. I have been a lurker here during that time but finally decided to post my problem and see if anybody knows a solution.

              Problem
              My tv (OLED55CXPUA) has an issue where it displays horizonal lines of dotted artifacts.

              (See Attachment 1)

              Self Diagnosing
              After a very long troubleshooting period I traced the issue to the T-Con board. If I gently flexed/bend the board I could make the display go from GOOD to BAD and vice versa. I have ruled out the connectors/wires...
              10-29-2023, 01:09 PM
            • Hink85
              Samsung UN65RU8000FXZA Led Driver Board
              by Hink85
              Hi All,

              I picked up a Samsung UN65RU8000FXZA 4k Smart TV a few weeks ago, in hopes I could repair it and get it working. It was purchased in Nov 2019, Samsung already replaced this tv by the original purchaser.

              I have eliminated the main board and power supply, and back lights are working. It was cycling on and off when i got it, I disconnected ribbon cables until I pinpointed it down to an LED driver board, and with the suspect board or ribbon cable section, 3/4 of the TV will now stay on and it no longer cycles on and off. I haven't found any shorted capacitors...
              08-12-2020, 07:03 AM
            • Loading...
            • No more items.
            Working...