Sharp LC32SH20U & AS15-F

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ecking767
    Badcaps Veteran
    • Oct 2009
    • 492
    • USA

    #1

    Sharp LC32SH20U & AS15-F

    I came across an lc32sh20u that power up and than display a fainted white picture. I check the T-CON board and it have the AS15-F gamma chip.

    I replace the AS15-F gamma IC chip, now the picture is normal but now anything display on the LCD screen slowly fade away and it back to no picture. It doesn't matter what is on the screen, if it the main menu or the input menu they both fade away.

    If I input a signal to the HDMI same thing happen, picture fade away. I do have sound. So I'm wondering, if the T-CON board is bad or the LCD screen.

Related Topics

Collapse

  • sefoster
    Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
    by sefoster
    I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
    11-20-2022, 09:29 AM
  • SONY_E-WASTER
    Help! Sharp LC-70UE30U 3 long flashes + 3 short flashes.
    by SONY_E-WASTER
    Hello, I'm new to this forum. I like to tinker with Sony electronics, I have been lucky trouble shooting sony stuff, But I can't find much info on this Sharp TV.

    The problem; plug to power>white led power indicator light is on>it turns on to the red Sharp logo>
    then the android logo is displayed, lit fine then the android logo brightness varies, then lit normal, then the tv restarts and does the same startup logos over and over for 5 times then it turns off and the power indicator light flashes the trouble code 3 long blinks plus 3 short blinks .

    does...
    12-26-2021, 05:46 PM
  • gavenb
    Sharp LC-80LE661U 80 inch
    by gavenb
    Hi folks!
    I have a LC-80LE661U that had some interesting issues.
    Initially, it would come on and show the sharp logo and would show normal static before shutting off.

    I started troubleshooting by disconnecting the led lighting strips and turning it on. It would do the same thing - come on, show the sharp logo and shut off. After reading, it was suggested to replace the main board. That was replaced and the same symptoms resulted. After this and some reading, the parts cannon got loaded up. I replaced the power board, same issue. Replaced the Tcon board and now it...
    11-12-2023, 02:05 PM
  • Superbee_dad
    Sharp 80” long short flash backlight error - Help
    by Superbee_dad
    Hello Sharp TV experts
    Our Sharp LC-80LE642U displays one short one long flash error code which is a backlight error. I went into service mode and there were 8 lamp error counts recorded. I reset the count to 0 and did a reset. The last monitor error cause was 16 B00014639:12. 16 is the code for backlight error. I tried to power the tv up but went back into error mode.

    > I checked voltages on the power supply board and they all check out .. including 3.28 volts at the error pin.
    > There is power to the cpu and T-CONN and no faults found there. The cpu has a flashing...
    01-24-2025, 11:51 PM
  • betmen
    TV Sharp LC-49CFE6242E - not working
    by betmen
    Hello,
    I get one old TV, Sharp LC-49CFE6242E which is not working.
    When turning on the TV, the inscription SHARP is displayed on the screen and after a few seconds the TV turns off.
    So far I haven't found what voltages should be at the output of the power supply and I haven't made any measurements.
    If anyone has any ideas, please let me know.​
    Starts
    10-19-2024
    Ends
    11-19-2024
    10-20-2024, 08:44 AM
  • Loading...
  • No more items.
Working...