I Need T-Con Fuses!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • max1636
    Senior Member
    • Dec 2013
    • 80
    • Australia
    #1

    I Need T-Con Fuses!

    I'm after a couple of T-Con fuses for when I get TV's with blown ones so I can fix them properly instead of using car fuses. I'd like to get them from Digikey but I've found they have tons of options. I'm just after a few 2A, 5A and 7A fuses (those are the common ones right?).

    Could somebody bring me up a page at least with the 5A Fuses, Thanks.
    Tags: None
    • mockingbird
      Badcaps Legend
      • Dec 2008
      • 5483
      #2
      Re: I Need T-Con Fuses!

      Would I be mistaken in assuming that you would be required to know the voltage in addition to just basing your replacement on amperage?

      What kind of fuses are they, SMD or just regular through-hole axial glass fuses?
      "We have offered them (the Arabs) a sensible way for so many years. But no, they wanted to fight. Fine! We gave them technology, the latest, the kind even Vietnam didn't have. They had double superiority in tanks and aircraft, triple in artillery, and in air defense and anti-tank weapons they had absolute supremacy. And what? Once again they were beaten. Once again they scrammed [sic]. Once again they screamed for us to come save them. Sadat woke me up in the middle of the night twice over the phone, 'Save me!' He demanded to send Soviet troops, and immediately! No! We are not going to fight for them."

      -Leonid Brezhnev (On the Yom Kippur War)

        Comment

        • max1636
          Senior Member
          • Dec 2013
          • 80
          • Australia
          #3
          Re: I Need T-Con Fuses!

          Originally posted by mockingbird
          Would I be mistaken in assuming that you would be required to know the voltage in addition to just basing your replacement on amperage?

          What kind of fuses are they, SMD or just regular through-hole axial glass fuses?
          I was assuming people on here know what voltage they are but I believe they are 12v.

            Comment

            • mockingbird
              Badcaps Legend
              • Dec 2008
              • 5483
              #4
              Re: I Need T-Con Fuses!

              Here you go mate:

              http://australia.rs-online.com/web/c...cuit-breakers/
              "We have offered them (the Arabs) a sensible way for so many years. But no, they wanted to fight. Fine! We gave them technology, the latest, the kind even Vietnam didn't have. They had double superiority in tanks and aircraft, triple in artillery, and in air defense and anti-tank weapons they had absolute supremacy. And what? Once again they were beaten. Once again they scrammed [sic]. Once again they screamed for us to come save them. Sadat woke me up in the middle of the night twice over the phone, 'Save me!' He demanded to send Soviet troops, and immediately! No! We are not going to fight for them."

              -Leonid Brezhnev (On the Yom Kippur War)

                Comment

                • max1636
                  Senior Member
                  • Dec 2013
                  • 80
                  • Australia
                  #5
                  Re: I Need T-Con Fuses!

                  Originally posted by mockingbird
                  Here you go mate:

                  http://australia.rs-online.com/web/c...cuit-breakers/
                  Thanks, Guess I'll just have to spend some time to find a match.

                    Comment

                    • max1636
                      Senior Member
                      • Dec 2013
                      • 80
                      • Australia
                      #6
                      Re: I Need T-Con Fuses!

                      So this is what I've found, I actually used Digikey:

                      Fast Blow:
                      http://www.digikey.com/product-detai...87TR-ND/700828
                      Slo-Blow:
                      http://www.digikey.com/product-detai...47TR-ND/552287

                      Anybody know which would be better for this application?

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Document Archive
                          Surface Mount Fuses Fundamentals Datasheet
                          by Document Archive
                          TE Circuit Protection offers the widest selection of surface-mount fuses available for addressing a broad range of overcurrent protection applications. Helping to prevent costly damage and promote a safe environment for electronic and electrical equipment, our single-use chip fuses provide performance stability to support applications with current ratings from .5A up to 20A.

                          TE Circuit Protection also offers the telecom FT600 fuse for telecommunications applications. This telecom fuse helps comply with North American overcurrent protection requirements, including Telcordia, GR-1089,...
                          10-07-2024, 06:07 AM
                        • x_orange90_x
                          TCL 50S535 bad tcon or panel issue?
                          by x_orange90_x
                          Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
                          03-29-2025, 11:02 PM
                        • advant
                          Driving a Sharp TCON/panel with a universal main board
                          by advant
                          This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                          I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                          02-03-2020, 12:25 AM
                        • Davi.p
                          Tcon fuses
                          by Davi.p
                          How many of you have encountered often broken fuses on tcon and them was the only fault on a tv:

                          1) On old heavy LCD TV: quite often - very rare?
                          2) Recent LCD then mostly LED era: quite often - very rare?

                          thanks..
                          03-19-2023, 10:32 AM
                        • Hakuu
                          LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                          by Hakuu
                          Hi There,

                          This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                          After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                          More Details

                          TV Model - LG OLED77G1PUA

                          Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                          07-12-2023, 02:37 PM
                        • Loading...
                        • No more items.
                        Working...