Un50cu7000 2 blink oddity *partially solved

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • EazyBone
    Badcaps Legend
    • Jun 2023
    • 1315
    • United states
    #1

    Un50cu7000 2 blink oddity *partially solved

    I write this to maybe help another with this TV.

    So I aquired this TV a 2023 model. It started the 2 blink reboot problem which indicates bad panel. It was still under warranty and the repair man came by.

    The Samsung repairman brought a brand new panel and switched my original boards to the new panel. The new panel then had the 2 blink error code. The repair guy said he has seen this and the MAIN board on this model will cause the 2 blink. He then replaced the main/power board (they are both connected) and put it back onto my original panel. Voila it worked.

    I asked many questions about this and he stated the newest of this model can have both the panel AND main board causing the 2 blink error.
    ​​​​​​
    moral of the story, on this particular model 2 blink error can Potentially be the main board. Good luck.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • JDC
      (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
      by JDC
      ONN 100012588
      Issue: No Power, Then Rebooting After Main Board Change

      Short answer: replace main board and power board
      Technical answer: replace main board and Q306 & Q307 on power board.

      Long answer:

      TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
      07-15-2022, 07:39 AM
    • cheeky2
      Sony RB2G Chassis KDL-55W815B MAIN BOARD 2 Blink Error issue resolved! Happy days :)
      by cheeky2
      For anyone interested just repaired this Sony Main board TV that had a 2 blink error code, the chassis is a RB2G which is common to quite a few different Sony models. The Ceramic 10uF 25V X7R 1206 capacitor C9114 was shorted which took the smd 2A 0603 fuse out F9101. This was powering the Buck converter TPS54332 which caused no 5V output from it.
      See the attached picture of the locations of both components. I also attach the best service manual I found for this board for anyone else in a similar position of trying to repair this main board. It's not specific to the TV model however it gives...
      01-08-2024, 05:56 AM
    • cheeky2
      Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
      by cheeky2
      I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
      Obviously the same LVDS connector for the screen connection...
      05-25-2024, 03:27 AM
    • Dani_2024
      Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
      by Dani_2024
      Hi and thanks in advance for any input you might provide!
      I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
      Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

      Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
      5 Photos
      10-28-2024, 05:06 PM
    • Asraf Atb
      Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
      by Asraf Atb
      Hi everyone,

      Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

      Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

      I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
      1 Photo
      01-27-2025, 05:02 PM
    • Loading...
    • No more items.
    Working...