Red light but no power - alba tv please help

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • SmartestSmarty
    replied
    Re: Red light but no power - alba tv please help

    Thanks for all your help.

    I have another TV to repair; I'll start another thread for that one and post the link on here also.

    I look forward to repairing the next one.

    Thanks again

    Leave a comment:


  • flocko
    replied
    Re: Red light but no power - alba tv please help

    Good job hope you continue to learn on here and find more sets to repair Flocko

    Leave a comment:


  • tom66
    replied
    Re: Red light but no power - alba tv please help

    Good to hear, enjoy your TV.

    Leave a comment:


  • SmartestSmarty
    replied
    Re: Red light but no power - alba tv please help

    Yes the board numbers were exactly the same. No worries I found the issue, I put one of the ribbon cables in upside down. Its all working now
    Last edited by SmartestSmarty; 04-19-2014, 05:23 AM.

    Leave a comment:


  • flocko
    replied
    Re: Red light but no power - alba tv please help

    Do all the numbers on he old main board match the new main? these have to be a complete match, also on the plug that goes to the T.con these board some times have more pins on the board then on the plug and needs to be fitted the same as the old one? so check these thing and reply Flocko

    Leave a comment:


  • SmartestSmarty
    replied
    Re: Red light but no power - alba tv please help

    Hello all,

    I completely changed the main AV board, the screen now comes on, but I am getting only a white screen. Any idea why? or how to resolve this?

    Leave a comment:


  • tom66
    replied
    Re: Red light but no power - alba tv please help

    See here for how to test voltage regulators
    https://www.badcaps.net/forum/showthread.php?t=22231
    try that on your board.

    Leave a comment:


  • SmartestSmarty
    replied
    Re: Red light but no power - alba tv please help

    Thanks. I am looking for a replacement board; however, I wouldn't mind attempting to fix this one myself. I can solder very well, and I'm sure there will be a youtube video out there explaining how to do SMDs. I don't mind if I need to purchase a different tester off of ebay or something. As you can see I like to learn and do things for myself.

    Leave a comment:


  • flocko
    replied
    Re: Red light but no power - alba tv please help

    Bad capacitors are to blame in about 5% of Tv repairs and cannot be tested with a multimeter.And as most of the part fitted to your main board are SMD and would need highly skilled soldering for there replacement a replacement board is your best bet. Flocko

    Leave a comment:


  • SmartestSmarty
    replied
    Re: Red light but no power - alba tv please help

    Thanks for the reply!

    Are you sure? I am willing to give it a go; I have to learn someday.
    I know how to change capacitors. So if you think It may be a bad capacitor, maybe you could tell me how I test them; and then I could change any bad capacitors if needed.

    Kind regards.
    Last edited by SmartestSmarty; 04-16-2014, 01:20 PM.

    Leave a comment:


  • flocko
    replied
    Re: Red light but no power - alba tv please help

    been out cutting grass,well as Tom said 12 volt supply are there i thinks the 5V from the main must be there as well for the red standby led to light, so my best bet would be bad main board. and as such i would suggest a replacement board as i would think that testing and a repair on this would be beyond you at the moment.Look for part number on main board then search on Ebay. Flocko

    Leave a comment:


  • SmartestSmarty
    replied
    Re: Red light but no power - alba tv please help

    I appreciate all the help,

    Do you need any other pictures?

    Leave a comment:


  • SmartestSmarty
    replied
    Re: Red light but no power - alba tv please help

    Originally posted by tom66
    Time to look at the main board, can you post a picture of it?


    Originally posted by flocko
    on that socket or near by is there any thing screen printed to tell us what should be there it could also be on the other end were it go`s to main board has the power board got a part number on it?
    In the centre of the power board it reads, ACT 3611 / ERL28-T002 (Is this the board part number?)







    This is what I can see.
    Last edited by SmartestSmarty; 04-16-2014, 08:11 AM.

    Leave a comment:


  • flocko
    replied
    Re: Red light but no power - alba tv please help

    Sorry just looked at your photos again and your power board is mounted to the plastic body of the set so the mounting screws would not be grounded flocko

    Leave a comment:


  • flocko
    replied
    Re: Red light but no power - alba tv please help

    on that socket or near by is there any thing screen printed to tell us what should be there it could also be on the other end were it go`s to main board has the power board got a part number on it?

    Leave a comment:


  • tom66
    replied
    Re: Red light but no power - alba tv please help

    It would appear the power supply is working then. Time to look at the main board, can you post a picture of it?

    Leave a comment:


  • SmartestSmarty
    replied
    Re: Red light but no power - alba tv please help

    I tried again this time I got.

    Red Wire: 12.71
    2nd: 12.71:
    3rd: 12.71
    4th: 0.00
    5th: 0.00
    6th: 0.00
    7th: 0.03
    8th: 0.00

    Leave a comment:


  • SmartestSmarty
    replied
    Re: Red light but no power - alba tv please help

    OK, I tried it again, this time I got.

    Red Wire: 12.71
    2nd: 12.71
    3rd: 12.71
    4th: 0.00
    5th: 0.00
    6th: 0.00
    7th: 0.03
    8th: 0.00

    Leave a comment:


  • SmartestSmarty
    replied
    Re: Red light but no power - alba tv please help

    Originally posted by tom66
    You can't be testing it correct then, if you get 0V there the power light would not work. Show us what your meter is set to please.
    Is this correct?



    Leave a comment:


  • tom66
    replied
    Re: Red light but no power - alba tv please help

    You can't be testing it correct then, if you get 0V there the power light would not work. Show us what your meter is set to please.

    Leave a comment:

Related Topics

Collapse

  • PantherDave
    Microsoft Surface Pro (5th gen) model 1796 - no power
    by PantherDave
    Hi all!

    I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

    I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
    https://www.badcaps.net/forum/troubl...-hardware-devi...
    05-29-2024, 02:01 PM
  • ipatch
    troubleshooting microsoft surface pro 4 no power no led charge light
    by ipatch
    hello, �� i have been sitting on some microsoft surface pro 4 tablets for a while now. i was originally tasked with replacing the battery in one of the tablets, and ended breaking the screen and logic board in the process. decided to buy another tablet with the same specs. got that screen off successfully of the second tablet. the logic board appeared good, but i guess i shorted something out in the installation process of the logic which i've read is a common issue if there is no barrier between the logic board and battery pins. all that said, i ate costs of the repair and have...
    10-05-2023, 11:59 AM
  • russpall
    LG 39ln540v - red light flashes twice, no power to LED driver?
    by russpall
    Hi there,

    I've got a 39" LG 39LN540V that's just spontaneously stopped working! The symptoms are - when I plug it in, the red light will flash on twice, then go out, there's no visible picture, and I couldn't see anything using a torch on the panel either. If I press the power button (either remote or on TV), the red light comes on continuously. If I press power again, the red light flashes twice.

    The TV is using a power board EAX64905301. I've attached a diagram of the power output, I've tested the voltages with a multimeter and I'm getting the following:
    ...
    08-27-2024, 01:07 PM
  • sam_sam_sam
    Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
    by sam_sam_sam
    I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

    One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
    03-31-2024, 02:12 PM
  • sam_sam_sam
    Laptop computer that went completely dead no boot no power light no hard drive light
    by sam_sam_sam
    See pictures for type of laptop computer

    I checked switching power supply brick 19.2 volts multi meter only

    No booting without switching power supply connected

    Checked switching power supply with an (28 volt ) incandescent light bulb it lights then hooked up the switching power supply again now the laptop and boots like normal

    What the heck is going on here...
    04-04-2025, 04:58 AM
  • Loading...
  • No more items.
Working...