xbr-75x950h 8 blink

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • EazyBone
    Badcaps Legend
    • Jun 2023
    • 1362
    • United states
    #1

    xbr-75x950h 8 blink

    Got this TV. Turn it on, shows Sony logo and stays for 20-30 second. Then restarts, does same thing (never gets to Android logo) and after second time it shuts off and does 8 blink code. Slight research says software failure.

    It's hard to navigate badcaps with new UI, so anyone have a link or process to update software on this? Videos on YouTube are of hindi guys with super old tvs lol. Thanks.
    Tags: None
    • EazyBone
      Badcaps Legend
      • Jun 2023
      • 1362
      • United states
      #2
      Actually ignore all of this. I noticed the TV had been opened and when searching the board I found a xbr75x900e main board in here instead of the correct one for this TV so I don't think software update going to do anything since it ain't for the TV.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • jojo88
          LG LED (LCD) TV 50LN5600-UI flashes logo, red LED 3x blink
          by jojo88
          This 50 inch LG LED (LCD) TV was given to me not working. Powering it on, the logo flashes once for 1/4 second then black. Front panel red LED blinks 3x (I think... see below) then the LED turns off. TV stays on until I press the Power button again. There is an image on the LCD panel--I press the "Settings" button on the TV and this brings up menus I can see with a flashlight / torch.

          (The front panel red error code LED blink sequence is a bit confusing to me. The LED is on when the TV is off. I press the Power button and the LED *very briefly* goes off--maybe 1/10 second--then...
          03-29-2023, 11:20 AM
        • Teban1306
          [REQUEST] ThinkPad T14 Gen 1 (20S1) - Custom Boot Logo Modification
          by Teban1306
          [REQUEST] ThinkPad T14 Gen 1 (20S1) - Custom Boot Logo Modification

          Hello everyone!
          I hope this is the right section for this request. I'm looking for help to modify the boot logo on my ThinkPad T14 Gen 1.
          System Information:
          • Model: Lenovo ThinkPad T14 Gen 1
          • Machine Type: 20S1S4E600 (Intel i7 variant)
          • Current BIOS: N2XET42W (1.33) - Latest version
          • BIOS File: n2xuj25w.exe (12.98 MB) - Downloaded from Lenovo support
          What I'm trying to achieve:

          Replace the default "LENOVO" boot logo with a custom image during POST.
          🔧 What I've tried:
          • [
          ...
          09-14-2025, 11:49 AM
        • cloo
          Panasonic ZT60 plasma tv with strange behavior and 8 blink code
          by cloo
          I recently got my hands on a 60" Panasonic P60ZT60 plasma tv (european model) that has some strange issues along with an 8 blink code.
          It know this tv is getting old but it was once considered one of the best plasmas ever made, and i think it is still holds on to that even by todays standards.


          So, long story short. When i first got the tv it had a very bright washed out picture with very raised blacks in all picture modes and i couldn't find the cause in the picture setting menus.
          After doing a factory reset this problem was gone and the picture was back to...
          01-06-2025, 06:02 AM
        • Verlengsnoer
          Bios splash/logo change
          by Verlengsnoer
          Hi all,

          at firs, i hope this is the right place to post my question.

          Im looking for a tool to change the bios logo.

          everyone knows when you turn on your laptop/pc you will see the manufacturer logo like lenovo, hp, dell...

          i know that HP has a build in option to change the splash logo.

          but i want to change the manufacturer logo to an own logo.

          I try'd Change Logo 5.0, but when i make a backup of an laptop and edit the logo and flash the editted version back on the laptop the logo diddnt change.
          ...
          10-28-2022, 09:52 AM
        • EazyBone
          Un50cu7000 2 blink oddity *partially solved
          by EazyBone
          I write this to maybe help another with this TV.

          So I aquired this TV a 2023 model. It started the 2 blink reboot problem which indicates bad panel. It was still under warranty and the repair man came by.

          The Samsung repairman brought a brand new panel and switched my original boards to the new panel. The new panel then had the 2 blink error code. The repair guy said he has seen this and the MAIN board on this model will cause the 2 blink. He then replaced the main/power board (they are both connected) and put it back onto my original panel. Voila it worked.
          ...
          03-18-2024, 10:24 PM
        • Loading...
        • No more items.
        Working...