TXP50V10E Probably SC Board broken
Greetings badcaps Community,
i need ur wise advice with my plasma. It's a Panasonic TXP50V10E.
It seems for me that the SC Board is broken, but before I order one on ebay i justed wanted to hear ur oppinion.
1) It often shut's down in the early stages of turning on till it's warmed up a bit, then it keeps running. When it shuts off by self in early stages the LED blinks 7 times = Error Code of SC Board
2) Image shows the actual broken state
U can see a lot of thick horizontal lines with wrong pixel coloring (don't know how to describe it im german sr)
It gets a bit better when TV is warming up but not much.
For me as shown with the Error Code by the TV the first thing i would do is get a SC board and look if it get's better or still things are broken.
What u guys say, am I right and should first order a new SC board?
-------------
Side Question
I was looking for SC Boards on ebay and found not exactly what i needed. Can i also use another one Serials following:
ACTUAL BUILD IN : TNPA4782-AF
FOUND ON EBAY : TNPA4782-AB
What does AF and AB stand for? Is this maybe NTSC/PAL difference or sth like that? (sr im noob so maybe this question is obsolete)
tia Synergi
i need ur wise advice with my plasma. It's a Panasonic TXP50V10E.
It seems for me that the SC Board is broken, but before I order one on ebay i justed wanted to hear ur oppinion.
1) It often shut's down in the early stages of turning on till it's warmed up a bit, then it keeps running. When it shuts off by self in early stages the LED blinks 7 times = Error Code of SC Board
2) Image shows the actual broken state
U can see a lot of thick horizontal lines with wrong pixel coloring (don't know how to describe it im german sr)
It gets a bit better when TV is warming up but not much.
For me as shown with the Error Code by the TV the first thing i would do is get a SC board and look if it get's better or still things are broken.
What u guys say, am I right and should first order a new SC board?
-------------
Side Question
I was looking for SC Boards on ebay and found not exactly what i needed. Can i also use another one Serials following:
ACTUAL BUILD IN : TNPA4782-AF
FOUND ON EBAY : TNPA4782-AB
What does AF and AB stand for? Is this maybe NTSC/PAL difference or sth like that? (sr im noob so maybe this question is obsolete)
tia Synergi
Comment