I had a TCL that I replaced the main board now the picture is upside down, Does anyone know if Roku have a service menu to rotate the screen?
Announcement
Collapse
No announcement yet.
Roku TCL flip screen, Anyone knows how to rotate the screen?
Collapse
X
-
Answer is on youtube, has to do with going to menu-contrast-putting 1950 in from remote-project id and probably getting the right one, might be more than one you need to try, ALWAYS make note/take picture etc of original settings, remember it's EASY to brick a tv if you get settings wrong in service menu.Last edited by nomoresonys; 02-13-2024, 08:34 AM.
-
Originally posted by nomoresonys View Postif lotus knew how to do it, he'd had piped up already.
Comment
-
Originally posted by lotas View Post
Lotas doesn't know which motherboard, which panel was there, which one was installed, there is little information, usually the revolution is performed through the service mode, through the terminal or via firmware, if such a competent person would help!
Comment
-
Here is a link of the same board, TV model 32s331, sticker on board is 08-MST1425-MA200A
https://www.ebay.com/itm/39515885542...Bk9SR7LGoYC5Yw
Comment
-
The answer was here:
https://www.avsforum.com/threads/tcl...board.3053434/
Turn on the TV and then hold reset for 10-12 seconds.
Skip all steps and go straight to
Settings > system > about
Press button combo: Up right down right up, fast forward 3 times, rewind 2 times.
That will bring you to a black flashing screen with a small menu, press the back button. Now scroll down to Project ID. There were at least 50 project IDs all using this same board. I scrolled to 55S405, hit enter, then press Home to save ...after that unplug the TV for 15 seconds and viola it works.
Comment
-
Originally posted by luzmina View PostThe answer was here:
https://www.avsforum.com/threads/tcl...board.3053434/
Turn on the TV and then hold reset for 10-12 seconds.
Skip all steps and go straight to
Settings > system > about
Press button combo: Up right down right up, fast forward 3 times, rewind 2 times.
That will bring you to a black flashing screen with a small menu, press the back button. Now scroll down to Project ID. There were at least 50 project IDs all using this same board. I scrolled to 55S405, hit enter, then press Home to save ...after that unplug the TV for 15 seconds and viola it works.
Comment
-
Good job luzmina, there's some very knowledgeable people posting on those forums.Last edited by nomoresonys; 02-25-2024, 06:58 AM.
Comment
Comment