lg 42 lh2000

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • welshlad27
    Member
    • Jan 2014
    • 30
    • uk

    #1

    lg 42 lh2000

    hey guys i do a lot of tv repairs but this tv has stopped me in my paths
    the problem i have it wont turn on just stays on orange ,reddish light as if its in stanby mode ,checked all caps etc all fine ,tried 2 other psu still the same

    traced the sensor at the front to the main psu and to the av board ,i was thinking av board or sensor at fault ne 1 have any ideas pls


    and a happy new year to all users
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: lg 42 lh2000

    Checked PSU outputs with DMM? Even if PSU good, bad main board could pull them down. Sounds like bad main board to me.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • welshlad27
      Member
      • Jan 2014
      • 30
      • uk

      #3
      Re: lg 42 lh2000

      hi tom do you mean main board as in the av board if do how do i go about checking it ive got a digi multi meter handy

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: lg 42 lh2000

        Main board = AV board = SSB...

        Set meter to 20VDC range, and measure each of the PSU outputs with red probe on output pin (press around pin sheath, the connector between main board and power board should be installed) and black probe on chassis. Compare against any PSU labels.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • welshlad27
          Member
          • Jan 2014
          • 30
          • uk

          #5
          Re: lg 42 lh2000

          ok thanks ill give that a try later and ill get back to you

          Comment

          Related Topics

          Collapse

          • Dani_2024
            Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
            by Dani_2024
            Hi and thanks in advance for any input you might provide!
            I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
            Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

            Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
            10-28-2024, 05:06 PM
          • ygorsan
            LG 55NANO77SRA TV – Menu scrolling by itself even after removing button board (Main Board EBU66792103)
            by ygorsan
            Hi everyone,




            I’m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







            🧩 Problem Summary:
            • The TV keeps scrolling through the menu or selecting items by itself.
            • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
            • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
            • I
            ...
            07-28-2025, 08:34 AM
          • jb_Bak
            Sony xbr-65x900c main board issues?
            by jb_Bak
            Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

            Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
            Power Board Connector that goes to Main board
            CN6401
            Pin 01 NC
            Pin 02 NC
            Pin 03 "BL_ON": 0V
            Pin 04 "N/C"
            Pin 05 "STBY 3.3V": 3.5V
            Pin 06 "GND": N/C
            Pin 07 "AC_OFF"...
            09-27-2021, 04:52 PM
          • JDC
            (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
            by JDC
            ONN 100012588
            Issue: No Power, Then Rebooting After Main Board Change

            Short answer: replace main board and power board
            Technical answer: replace main board and Q306 & Q307 on power board.

            Long answer:

            TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
            07-15-2022, 07:39 AM
          • m1ch43lzm
            HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
            by m1ch43lzm
            Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
            Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
            05-12-2025, 08:37 PM
          • Loading...
          • No more items.
          Working...