2011 rca 46la55r120q led tv - backlight works, no picture, no sound

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kburks1230
    Senior Member
    • Mar 2010
    • 87

    #21
    Re: 2011 rca 46la55r120q led tv - backlight works, no picture, no sound

    Originally posted by tom66
    Hmm, yeah, I looked closely at that board again and the power for the t-con passes straight through the board. Not sure what else to suggest; looks like your main board is bad.
    I replaced the main board, now I have 12v on the 4 red wires where there was no voltage before. I also replaced the TCON board and still have something like .3v on the fuse on the TCON board. What the heck?

    I still have the same problem, no pic or sound...

    Comment

    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK

      #22
      Re: 2011 rca 46la55r120q led tv - backlight works, no picture, no sound

      Could be a broken connector or wire assembly?
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • kburks1230
        Senior Member
        • Mar 2010
        • 87

        #23
        Re: 2011 rca 46la55r120q led tv - backlight works, no picture, no sound

        What about this board:
        This board goes between the main board and the TCON board:
        DIGITAL BOARD RE3342B051-C1

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #24
          Re: 2011 rca 46la55r120q led tv - backlight works, no picture, no sound

          Can we get a pic of it? Could be motion FRC for 120Hz picture.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • lalin
            M
            • Apr 2015
            • 20
            • us

            #25
            Re: 2011 rca 46la55r120q led tv - backlight works, no picture, no sound

            Is this the best way to know the logic board is working, to test the voltages coming out of it? thanks

            Comment

            Related Topics

            Collapse

            • TR103
              Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
              by TR103
              Hi, I have a Samsung UE50TU with:
              - sound and backlight, but no picture
              - when it arrived, it had a picture for a few seconds
              - it keeps rebooting
              - without ribbon cable between the two panel boards, it does not reboot but I have no picture
              - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
              - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

              - without cable between mainboard and lcd panel and with a jumpered...
              01-22-2025, 04:12 PM
            • ex250
              Kenwood SW-505D no sound issue and pops from time to time when it works
              by ex250
              Hello mates,

              I bought this subwoofer a few days ago used and blind and it works erratically, as far as I could see, it has been tampered with, the speaker is not the original one and of 8 Ohm when it should be of 4, and there are some welds like reworked by the boards.

              It doesn't have much power (expected more from it) and it distorts if you increase the volume over the middle, maybe it's because of the high impedance of the speaker. The problem is that it has sound when it wants, the led panels all work correctly, you can hear the power relay on power on, but right now...
              12-29-2024, 03:27 PM
            • Mgiffune
              Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
              by Mgiffune
              I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

              I ordered a supposedly ‘new' Tcon board this time, and
              ...
              06-09-2024, 10:28 AM
            • Ierwin
              Samsung UE60KU6079 backlight okay mainboard responsive, no picture, no sound
              by Ierwin
              Hello everyone,
              Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
              The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
              He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
              I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
              Anyway I still fully expect that there has been something seriously damaged...
              05-13-2025, 03:31 PM
            • jchang
              Samsung UN70NU6900F no picture and no sound
              by jchang
              Hi all

              I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.



              Symptom:
              No picture no sound.
              When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
              No sound at all.



              What I tried:
              1. I tried unplugging the left or right ribbon...
              01-09-2023, 06:28 PM
            • Loading...
            • No more items.
            Working...