Philips LCD TV 40PFL5625H power supply model

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jooo
    Badcaps Veteran
    • Oct 2011
    • 222
    • Finland

    #1

    Philips LCD TV 40PFL5625H power supply model

    I got one of these TV's but without power supply.
    The panel looks ok so it would be easy fix if it was just the PSU that had failed.
    It's hard to find replacement power supply without the original part number, so if anyone has any clue what the psu model would be, help would be appreciated
    I couldn't even find a proper service manual...
    Attached Files
    Last edited by Jooo; 10-23-2013, 09:08 AM.
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Philips LCD TV 40PFL5625H power supply model

    Service manual should have PSU part#
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • Jooo
      Badcaps Veteran
      • Oct 2011
      • 222
      • Finland

      #3
      Re: Philips LCD TV 40PFL5625H power supply model

      Thanks, found it - Delta DPS-206CP A B

      That seems to have high quality caps.
      I will start looking for a replacement board, hopefully the PSU was the reason this was tossed out. Atleast the panel looks perfect, but no way to test it out.

      I was just going through my box of spare TV board, found a set dissambled from 42" 42PFL5405H/12 Philips with broken panel: the main board is identical, but the power supply is different. Obviously the connectors going to the main board are same, but the backlight connectors are different, any way to make this work with this model?

      The first photo is the Delta DPS-206CP A B PSU for this 40PFL5625H, second picture is the PSU from 42PFL5405H/12 which I had lying around: 3PAGC20020A-R - PLHD-P982A - MPR 0.1
      Attached Files

      Comment

      • aaronwt6
        Badcaps Veteran
        • Apr 2013
        • 855
        • US

        #4
        Re: Philips LCD TV 40PFL5625H power supply model

        I wouldn't think so looking at the two pictures. It appears the 1st board has individual outputs for each CCFL whereas the 2nd uses an external balancer board to feed each CCFL.

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #5
          Re: Philips LCD TV 40PFL5625H power supply model

          More importantly, the 40" is an LED set, the 42" is CCFL.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • ftnewl
            New Member
            • Apr 2015
            • 2
            • Germany

            #6
            Re: Philips LCD TV 40PFL5625H power supply model

            Originally posted by tom66
            More importantly, the 40" is an LED set, the 42" is CCFL.

            Philips 46PFL5605H/12 Powerboard, FSP173-3MS01 ?

            Comment

            • ftnewl
              New Member
              • Apr 2015
              • 2
              • Germany

              #7
              Re: Philips LCD TV 40PFL5625H power supply model

              Originally posted by ftnewl
              Philips 46PFL5605H/12 Powerboard, FSP173-3MS01 ?


              http://www.ebay.de/itm/121505193278?...%3AMEBIDX%3AIT

              Comment

              Related Topics

              Collapse

              • sam_sam_sam
                Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                by sam_sam_sam
                I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                03-31-2024, 02:12 PM
              • Tynan Dill
                Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                by Tynan Dill
                I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                Upon bringing it home and plugging it up, it showed a standby light.

                I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                The screen seems to blackout and stay black, but with a flashlight I can see the display.

                With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                Assuming...
                11-22-2024, 01:46 PM
              • sam_sam_sam
                Modification to a ZD-987 desoldering/soldering station using a external switching power supply
                by sam_sam_sam
                I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

                I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
                07-01-2024, 06:34 AM
              • JimBanville
                Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
                by JimBanville
                The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
                Opened it up and discovered the power supply is making a faint clicking or ticking sound.
                I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
                I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
                09-13-2023, 07:21 AM
              • Andreas_de
                Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
                by Andreas_de
                Hello!

                i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
                Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

                Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
                ...
                04-12-2025, 10:38 AM
              • Loading...
              • No more items.
              Working...