TH-50PX75U NO Video\Sound No Blinks Turns on fine

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • reliantkcar
    Member
    • Aug 2013
    • 34
    • usa
    #1

    TH-50PX75U NO Video\Sound No Blinks Turns on fine

    I have a TH50PX75U

    50" plasma tv. it turns on fine and you can see the glow
    it turns on from the remote also

    it just doesn't show a picture or do anything after that

    I checked the service manual and unplugged D5 connector and powered it on
    I get a full white screen so according to that the power,sustain,and D board are fine.

    I'm thinking mainboard or the mainboard isn't getting the right voltage

    any ideas it seems all the normasl issues have a blink code?
    Tags: None
    • reliantkcar
      Member
      • Aug 2013
      • 34
      • usa
      #2
      Re: TH-50PX75U NO Video\Sound No Blinks Turns on fine

      Any ideas the mainboard seems impossible to find anyone selling one?

        Comment

        • tucocaps
          Badcaps Veteran
          • Apr 2013
          • 331
          • United Stated
          #3
          Re: TH-50PX75U NO Video\Sound No Blinks Turns on fine

          I might be selling parts off the one I have, if I can't fix it. Be sure you have a real good idea of what is wrong though. Debugging this kind of tv can be more than tricky (see my other posts on my SD woes).

            Comment

            • reliantkcar
              Member
              • Aug 2013
              • 34
              • usa
              #4
              Re: TH-50PX75U NO Video\Sound No Blinks Turns on fine

              I followed the service manual and when I unplugged the D5 from the main to d board i got a solid white screen which is supplied by the ic on the d board and there were no lines or artifacts and the manual said the only thing it could be is the mainboard.

              and everywhere the power,d board,and mainboard are out of stock so these tv have alot of issues. I should have kept my Yamaha PDM-1 it just had one intermittent vertical green line and was from 2002 and worked perfect....

                Comment

                Previous template Next

                Related Topics

                Collapse
                • marce002
                  Macbook A1465 works fine Linux but turns off in MacOS
                  by marce002
                  Hello

                  I have this macbook Air 11 inch, was working fine with macos,,, then suddenly turns off by itself after apple logo screen.....it cant boot...
                  Formating and installing does not work because it also turns off.....

                  But: booting linux ubuntu from pendrive and also installing it in ssd works fine!! hours and hours, the macbook runs fine and fast and cool....

                  So she does not like MacOS , loves Linux... can this be related to EFI? I have tried booting macos with shift pressed and allow me to login but even in this safe mode it turns off itself with...
                  02-02-2022, 05:43 PM
                • ILoveZeroTwo
                  LG OLED77B29LA shuts itself down/doesn't start
                  by ILoveZeroTwo
                  Hello,

                  I'm trying to fix a TV that got damaged by rain (open window during a storm).

                  The TV at first would start up and work completely normal, with no lines on the screen or anything. But after about 30 seconds, it turned itself off. After it shut itself down, starting it up directly afterward is no longer possible.

                  The standby light is red and it blinks once on the power-on command by the remote. The relay also does not click anymore when plugged into the wall.

                  Standby voltages are all present and stable, approximately 13V for the 20V line...
                  08-07-2024, 09:22 AM
                • AustinComputerDoctor
                  Sharp CC-60LE640U - after mainboard replacement, backlite turns on -- but cannot update firmware / see menu
                  by AustinComputerDoctor
                  Hello,

                  I am looking / wondering if anyone knows where a good firmware download link is for a LC-60LE640U, the sharp support sight says the screen is archived but offers no links.

                  I see backlite is active,

                  but I cannot get the screen to return back to menus , etc

                  This is all after replacing the mainboard...

                  any assistance is greatly appreciated.
                  03-25-2024, 12:43 PM
                • Stephen
                  MacBook Pro 14" M1 Pro Turns on functions then turns off when I plug in USB C cable
                  by Stephen
                  MacBook Pro 14" M1 Pro Turns on functions then turns off when I plug in USB C cable to reset the computer. I disconnect the battery fully and then reconnect it and it won't turn back on. After letting it sit for a day I plug the battery back up, and the MagSafe 3 cable and it powers on and stays ons, once I plug in a USB C cable into the port closes to the MagSafe port it turns off and the Amber light turns off and won't turn on. No water damage, nothing, I want to do a DFU restore to wipe the computer since the customer stated they did an update and ever since it just decided to not work...
                  03-15-2024, 09:37 AM
                • caspian
                  Asus K555U taking extra current
                  by caspian
                  Dear Members,
                  This laptop used to work with a 19v 3.4A adapter.
                  After 4 years of using it, now, the adapter's output voltage drops to 17v when windows loads up. Then the laptop suddenly turns off.
                  Today, I have connected a 19.8v 4.5A adapter to this laptop. Then the adapter's output voltage dropped to 19.4v but the laptop worked fine.
                  In addition, I noticed that the cpu power coils get warm to about 50'C but the mosfets are cool.
                  All the voltage rails on the mainboard are fine without any reduction except for the 19v rail. All the ICs and coils on the mainboard are...
                  05-31-2024, 01:36 AM
                • Loading...
                • No more items.
                Working...