vizio vw37lhdtv10a powersupply problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • awyatt2
    Badcaps Veteran
    • Feb 2012
    • 407
    • america
    #1

    vizio vw37lhdtv10a powersupply problem

    got a vizio here with a bad trace on the bottom of the powersupply, several traces close need aq pic of the bottom side. if anyone has one or a schematic. looks like a shorted rectifier and blown fuse but I have no output till I jump the traces.
    thanks and hope everyone has a happy independence day holiday.
    Tags: None
    • awyatt2
      Badcaps Veteran
      • Feb 2012
      • 407
      • america
      #2
      Re: vizio vw37lhdtv10a powersupply problem

      ok, here is a pic of a supply I found the blown areas has been repaired now I have no 12v supply. the orange vizio logo no white. set not starting.

        Comment

        • awyatt2
          Badcaps Veteran
          • Feb 2012
          • 407
          • america
          #3
          Re: vizio vw37lhdtv10a powersupply problem

          think I got the pic this time,
          Attached Files

            Comment

            • Ovalking
              Senior Member
              • Jul 2013
              • 57
              • Usa
              #4
              Re: vizio vw37lhdtv10a powersupply problem

              Find out anything have same pronlem

                Comment

                Previous template Next

                Related Topics

                Collapse
                • rajbot
                  No Power problem with Vizio E60-E3
                  by rajbot
                  Hi all:

                  I have a Vizio E60-E3 I am trying to troubleshoot a no power problem with. Thanks to the help on this board and elsewhere, I was pretty sure I had narrowed it to a power board problem. The board in question is a 09-60CAP0D0-00. Image attached for reference, but not of my board (tv is put away at the moment). FWIW, no obvious looking issues with the board.

                  I measured voltage at power in and on the fuse and saw 120V, so power is getting to the board.

                  On the pins out to the main board, I got no voltage at all on any of the pins. I assumed this...
                  03-22-2023, 08:09 AM
                • theone111
                  Problem with LG Plasma 60PM6700 - Random power downs
                  by theone111
                  I have an LG Plasma TV 60PM6700 for the past ~12 years.

                  In the last ~3-4 months I have been having some issues.
                  1. Problem: It started with random picture disappearing (sound still worked).
                    Frequency: Happened about once a week.
                    Solution: Had to turn off TV wait a few seconds before turning it on again.
                  2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                    Frequency: Happened about once a week.
                    Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
                  3. Problem: TV shuts down
                  ...
                  1 Photo
                  07-22-2024, 10:36 AM
                • Zeonalbasta
                  Thinkpad X1 Carbon "LMQ-1MB 12298-2 48.4LY26.021" VCC3M problem
                  by Zeonalbasta
                  i have a problem with thinkpad X1 carbon gen 2 "LMQ-1MB 12298-2 48.4LY26.021"
                  The laptop was turned off because the MOSFET was not transmitting voltage. After checking it turned out that the gate pin on the MOSFET was the problem, because it was producing an inappropriate voltage. and it was discovered that the problem was with the Think engine, so I decided to reprint each pin, and finally the mosfet could work properly. However, there is another problem, even though the voltage has been supplied to the laptop, it still won't turn on, there isn't even an LED indicator. After double...
                  09-13-2024, 01:17 PM
                • Pinky Deepak
                  Vizio M60-C3 Left Edge problem
                  by Pinky Deepak
                  I have a M60-C3 where the left edge has started showing issues as seen in the picture attached. Along with this, I also noticed some darkening on the left half of the screen which went away after I left the TV unplugged. i initially thought it was the led backlight that was wearing out but looks like something to do w the TCONN board. I searched this forum but couldn't find anyone else seeing this issue. most of them were LH/RH completely gone. any insights or guidance is appreciated.

                  Here's a video of both the issues: https://youtu.be/hMqc760nB3o
                  1 Photo
                  09-27-2024, 05:11 PM
                • Gibon378
                  Problem with stopping audio and video for no reason
                  by Gibon378
                  PC Specs:
                  • CPU: Ryzen 5 1600
                  • GPU: GTX 1080 Palit JetStream
                  • MOBO: ASRock ab350 PRO4
                  • RAM: Crucial Ballistix Sport 2x8GB 3000MHz (XMP 2.0)
                  • PSU: XFX 650W (don't remember what model)
                  • OS SSD: ADATA SP920
                  • OS: Windows 10 21H2


                  Problem description:
                  Hi. I have a problem that has been going on for some time (2-3 years). It's hard to explain what it really is. Sometimes, my computer stops playing music, stops videos (starts buffering on youtube), there is no sound in games and when I minimize the game window and return to the game there is a black screen with window borders...
                  11-19-2022, 09:41 AM
                • Loading...
                • No more items.
                Working...