LG PLASMA 50PQ30 rainbow effect + dark screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • playgoods
    Member
    • Jan 2014
    • 18
    • South Africa

    #21
    Re: LG PLASMA 50PQ30 rainbow effect + dark screen

    Any news here? I have one with the same fault

    Comment

    Related Topics

    Collapse

    • Ryan.man
      Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
      by Ryan.man
      Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

      My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

      This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
      02-04-2025, 12:23 PM
    • Alicat
      Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
      by Alicat
      Hello,

      Stopped by this site trying to fix my parents Panasonic Plasma TV.

      Model number is TH-50PZ85U

      Power comes on and the red power light stays on solid.

      Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

      I also hear a few clicks.

      I also think my parents said there was a thunderstorm and the TV failed after that.

      Section 6 in the service manual talks about power and no screen,...
      10-30-2024, 10:09 AM
    • reformatt
      Macbook Air M2 A2681 Kernel panics after screen replacement
      by reformatt
      Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

      It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
      07-31-2025, 08:37 PM
    • smic717394
      iphone XS turns off when press on screen.
      by smic717394
      Hi,

      I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
      07-25-2024, 10:16 AM
    • Zelek11
      Panasonic Plasma screen interference on left half of screen
      by Zelek11
      My Panasonic Plasma model P55VT50 has started displaying "interference" on just the left half of the screen only (left when facing the screen). Sometimes it's concentrated in about the first 30 seconds after startup, then disappears. Other times it's fine at startup and then randomly does it later on. When it flashes the interference it's very quick and doesn't stay on the screen unless it flashes repeatedly in a row.



      This image is a screen shot from a video I took. This is an example of the interference at its worst. Often the interference is much smaller...
      10-14-2022, 04:54 PM
    • Loading...
    • No more items.
    Working...