marants-lc3250ex

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • willyam1
    Senior Member
    • Feb 2012
    • 112
    • israel
    #1

    marants-lc3250ex

    Hi to all.
    this tv came no power dead.
    found 5a fuse and rectifier short.
    change them and now back light is flickring.
    notice that instead 24v ther 20v and 12 its 10v and they not steady.
    notice that the PFC section is not working and the voltage in the big capi is always 300v found 2 smd resi 2.2 and 220 ohm open change them and I change also ic smd pfc fan7527 but no luck still flickeringTHE IC PIN 8 VCC IS 14V but no pulses to the pfc transistor and diode.
    the power supply is BPS-402 REVA 23.2.2006.
    ant schematic or idiae?.
    willyam
    Tags: None
    • willyam1
      Senior Member
      • Feb 2012
      • 112
      • israel
      #2
      Re: marants-lc3250ex

      tv is fixed.
      didn't see the big transsitor was blown away its hiding neer the ciol of pfc change it and resolder the new is fan7527 .
      works fine about an 60min.now voltage in the pfc big smooth capi is 398v
      willyam
      Last edited by willyam1; 06-07-2013, 01:57 AM.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • m1ch43lzm
          Notice to users of XGecu TL866II Plus / T48 / T56 / T76 programmers regarding BIOS backup file size
          by m1ch43lzm
          Hi everyone
          I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
          Programmer models: XGecu TL866II Plus / T48 / T56 / T76

          Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
          There's also an extra OTP Secu.R...
          09-06-2025, 05:47 PM
        • WesleyChishakwe
          Huawei Matebook X (WT-W09) Schematic and Boardview
          by WesleyChishakwe
          Good day guys, I REALLY NEED your assistance. So I bought this Huawei Matebook X, model: WT-W09 (motherboard name/ID: KOLLUR) from an auction hoping to repair it so that I can use it as my personal laptop. When I press the power button I get no picture(display) and the caps lock light comes on and stays like that for about 5 Seconds then the laptop shuts down.
          The battery has voltage in it but won't charge and I did notice on the DC power supply that the laptop Drew 0.03A before going down to zero. I have been looking everywhere for the BIOS of this laptop or the boardView since the motherboard...
          1 Photo
          05-27-2025, 09:52 AM
        • triplefour
          ONN 100012588 Has fluctuating Voltage on PSU 12v
          by triplefour
          Hello all got another TV here im puzzled by. why cant they all be easy fixes that just need a little love and some tape???

          anyway i go to this guys house to look at an ONN 100012588
          this is my first time looking at one of these brand of TV's.
          TBH i have low expectations because i see ONN as the cheap walmart brand that suddenly popped up selling the cheapest version of all kinds of tech things. and someone sent me a ONN flash drive with some data on it with some recordings they wanted me to check out and it immediately broke and corrupted the data and i was unable to...
          09-14-2022, 07:41 PM
        • warsztat
          Acer AN515-57-577G JDIMM1 socket not working.
          by warsztat
          Hello, Acer AN515-57-577G JDIMM1 socket does not work. GH51G LA-L181P, 2x DDR4 RAM, both good, both work well in JDIMM2, neither works in JDIMM1. The laptop displays BIOS, when the JDIMM2 socket is occupied, you can run Linux on USB, then everything seems to work ok, there is internet access and you can browse the contents of the 512 GB SSD in Windows, but starting Windows ends with an eternal spinning circle, maybe there are corrupted files. When the RAM is inserted into the JDIMM1 socket, the laptop starts but there is no image and the downloaded current does not change and the output is ~2.25A....
          11-18-2024, 09:13 AM
        • valente222
          HP 14 LA-A993P REV 1.0, identify ic? and not susp# present
          by valente222
          I have a Mb LA-A993P REV 1.0 computer, I am guiding myself with these two shared boards. ;
          there are some ICs that are not the same, in this case those of the PU1501 (JD4TB) and PUH1 (NF4SA) images.
          n, please identify.

          330mA of consumption after 8 seconds turns off. +3VALW AND +5VALW present, EC_RSMRST# , LID_SW# , EC_ON# , ACIN# present.
          ​

          SUSP# NOT PRESENT, which would be this the problem does not turn on sub-sources Any leakage?

          I also notice that in the PLH2 coil that belongs to +1.05VS according to the drawings I am not sure,
          ...
          06-27-2024, 06:11 PM
        • Loading...
        • No more items.
        Working...