LG FLATRON M208WA No display

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PlusCom
    Senior Member
    • May 2013
    • 50
    • Greece

    #1

    LG FLATRON M208WA No display

    Hi! First I want to say one big BRAVO to all the people in this forum for the big help they providing. I've found this forum some days ago and I must say i'm amazed from the skills of some people in here.

    Now to my problem.
    I have LG FLATRON M208WA TV. When I press the power button the screen comes for 2-3 seconds then turning off, but I can hear the sound. Sometimes it stays on until I press the power button,but this is very rarely and the screen is flickering a little. I've ordered another (Used) power board but same thing.

    If someone can help I'll be very thankful . I'm not some genius in TV repairs so please explain with details if you can.

    I'm uploading some images of the board, sorry for the bad quality I don't have my camera with me now. If you need more detail photos I can upload.
    Thank you!
    Attached Files

Related Topics

Collapse

  • Woodsworth
    PS3 CECHC03 60GB YLOD Troubleshooting
    by Woodsworth
    I have a post on psx-place for this but thought I'd try here as well in case anyone has experience or the schematics or any kind of help. Here's the original post from psx-place:
    START
    Hi, so I bought a YLOD Fat PS3 as I wanted a repair project and thought it would be a good way to get experience. I was able to solder to the RX, TX and Diag pads on the COK-002 motherboard and was able to get external access and retrieved the codes. I haven't powered it on beforehand so these should be the last ones. I did try to get internal access immediately after but kept getting scopen response...
    03-19-2024, 07:58 AM
  • smic717394
    iphone XS turns off when press on screen.
    by smic717394
    Hi,

    I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
    07-25-2024, 10:16 AM
  • Sraros
    LG Flatron M208WA vertical purple stripe
    by Sraros
    I have this TV-monitor out of a sudden appeared a vertical purple stripe.
    I checked voltages on the main board, all fine. Cleaned and reseated the cable to the panel board but nothing. Is there a chance to be fixed or send it for recycling?...
    01-06-2021, 04:04 PM
  • BMCappelletti
    Lenovo Thinkpad E14 Gen3 stuck on "To interrupt normal startup, press Enter" screen
    by BMCappelletti
    Hi everyone.
    Lenovo Thinkpad E14 Gen 3, stuck on the "To interrupt normal startup, press Enter" screen.
    Found a lot of people with this issue, but with no definitive answer. Some people managed to get away accessing BIOS, going to Startup and turning off "Option Key Display". For me that only removed the interrupt normal start up message, leaving only the Lenovo logo.
    Most people say hitting Enter does not work. It's true, if you wait a few seconds. But if you hit Enter right away you get the options to enter BIOS (which works), run diagnostics (goes to a...
    02-18-2025, 12:22 PM
  • eliemgh
    lenovo t14 i7 10 gen : I press the power button and there is a loud fan noise
    by eliemgh
    lenovo t14 i7 10 gen : I press the power button and there is a loud fan noise for about 3 seconds and power light is on. Nothing on display screen. i have removed the battery and bios battery still the same. i have put yesterday on update and charger ,i have leave and back and see this problem. Any One Can help Me ?
    09-27-2024, 02:40 AM
  • Loading...
  • No more items.
Working...