Rca 42pa30rq

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bmich1964
    New Member
    • Apr 2013
    • 2
    • USA

    #1

    Rca 42pa30rq

    I have a 42" Plasma 42PA30RQ that I got for free. I have seen a few posts on this model
    It has no picture or sound and clicks when turned on.
    I have replaced main power board and Y-Main board still clicks and no picture
    Question is If I replace the x-main board does anyone think that will fix the problem
    None of the components looks bad at all

    Thanks for any reply
    Bill
    Last edited by bmich1964; 04-19-2013, 12:14 PM.
  • Dgtech
    E. Technician
    • Apr 2009
    • 1462
    • Steeler

    #2
    Re: Rca 42pa30rq

    Originally posted by bmich1964
    I have a 42" Plasma 42PA30RQ that I got for free. I have seen a few posts on this model
    It has no picture or sound and clicks when turned on.
    I have replaced main power board and Y-Main board still clicks and no picture
    Question is If I replace the x-main board does anyone think that will fix the problem
    None of the components looks bad at all

    Thanks for any reply
    Bill
    It sounds like a power board problem to me. Post pictures of the set layout.
    The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS

    Comment

    • bmich1964
      New Member
      • Apr 2013
      • 2
      • USA

      #3
      Re: Rca 42pa30rq

      I have replaced main power board and x-main board
      Attached Files

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Rca 42pa30rq

        This is often an x-main problem however sometimes a bad x-main can damage the y-main on these plasma panels so carefully check each for shorts.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • capkid
          Badcaps Legend
          • Oct 2010
          • 1339
          • United States

          #5
          Re: Rca 42pa30rq

          Here are my thoughts on this family of Samsung-based TVs: https://www.badcaps.net/forum/showpo...74&postcount=5
          Last edited by capkid; 04-20-2013, 12:33 AM.
          LG Plasma Mal-Discharge Correction Service

          Comment

          Related Topics

          Collapse

          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            11-22-2024, 01:46 PM
          • m1ch43lzm
            HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
            by m1ch43lzm
            Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
            Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
            05-12-2025, 08:37 PM
          • ermals
            Samsung UN55H8000AF - No Picture, Working Backlight, Replaced T-Con Board
            by ermals
            Hi all!
            I've recently run into an issue with my Samsung UN55H8000AF LED TV displaying no image. I've done quite a bit of research in terms of what could be wrong with it. Below are the steps I've taken prior to reaching out here for some assistance:

            1. I've tried replacing the T-Con board (BN95-01594A), twice and have still experienced the same issue with all the boards I've tested with.
            2. I've tried to remove one side of the ribbon cable that goes from the T-Con board to the panel and still not getting any image on left or right side.
            3. I've checked voltages...
            08-01-2022, 10:35 AM
          • jb_Bak
            Sony xbr-65x900c main board issues?
            by jb_Bak
            Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

            Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
            Power Board Connector that goes to Main board
            CN6401
            Pin 01 NC
            Pin 02 NC
            Pin 03 "BL_ON": 0V
            Pin 04 "N/C"
            Pin 05 "STBY 3.3V": 3.5V
            Pin 06 "GND": N/C
            Pin 07 "AC_OFF"...
            09-27-2021, 04:52 PM
          • garrymc123
            Luxor TV board input board change but picture upside down
            by garrymc123
            Looking for some advice changed over the video input board due to bad hdmi ports but now the picture is upside down tried the service menu but can't find anything to do with flip the picture..

            Is there anything I can do to flip the picture or do I need to change the board again..

            Thanks
            Garry...
            08-29-2022, 04:53 AM
          • Loading...
          • No more items.
          Working...