JVC 32DM20 Back Lights Turning On and Off

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • landen_michael77
    Senior Member
    • May 2012
    • 57
    • united states
    #1

    JVC 32DM20 Back Lights Turning On and Off

    I have a JVC 32DM20 here, and it will turn and and light up for a few seconds. Then it goes black for about 30 seconds then the lights come on for a few seconds again. It just keeps repeating this cycle over and over. I will ad a picture of the power supply board. I know it looks burnt, but I have had these boards in Emerson tvs before which also looked burnt in the same spots, but still worked fine. Any sugestions would be great. Thank you in advance.
    Attached Files
    Last edited by landen_michael77; 04-18-2013, 12:02 PM. Reason: picture
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      ORIGINAL POWER SUPPLY BOARD
      7 Photos
      11-22-2024, 01:46 PM
    • tennno`
      RCA LED46C45RQ,Sound but no Back lights
      by tennno`
      Sound no picture RCA LED46C45RQ,Power Supply Board RE46HQ1301.
      Has All voltages coming from main board.No voltage going to
      Back lights from power board.Have no Schematic.Back lights work when
      Led Back light Strip tester is used.Tester shows 110 volts from each
      side.Also if you use the side controls and use the vol +or- tv shuts
      down.
      Thanks for any help
      04-10-2022, 03:34 PM
    • liquidzorch
      Lenovo 15iml05 Power led lights for 12 seconds then off 12 seconds
      by liquidzorch
      Hello. I bought a faulty Lenovo ideapad 3, but it turns out the 3Valw buck converter burnt a hole through the board. I was able to clean it up, and remove all the shorts. I now can power the 3.3v rails from a bench power suppy while connecting the laptop to its psu, and I get the additional 5valw, 1.8v, and 1.05v, form what I can tell in the schematics, those are the only 4 voltages I should see before turning on, and they are present. When I hit the power button, the power indicator on the left side turns on (not the one on the power button), stays on for about 12 seconds, then turns off for...
      10-18-2024, 05:19 PM
    • sam_sam_sam
      Lift Master Garage Door wall switch display / motion sensor controller display disappeared no back light
      by sam_sam_sam
      This happened last Saturday and today I finally had time this morning before I went to work to replace two non brand capacitors

      I will let you be the judge weather or not these are bad or not according to the blue ESR meter that I am using

      I am comparing them to a brand new one that I installed

      The display came back on and the programming was not lost which I was surprised by I would have thought that when the display went blank that so did the memory as well

      I going to let it run for several days before I remount back on the wall next to the...
      09-05-2024, 06:48 PM
    • handsworth
      TCL 55S425 backlights wont turn off
      by handsworth
      Need some advice here. So I picked up this 55" off the curb and diagnosed it with bad leds. I opened it up, tested the 4 strips with the tester and yes, 2 strips had burnt leds. I ordered a new set and installed them. But before putting tv back together, I always test tv to make sure I did it correctly. Tv lights up and works, however when turning tv off, the top set of leds remain on. Swapped power supply with identical one and same results. Swapped MB with identical one, same results. So I put the tv back together and reset MB. Tv works fine like new, but leds remain on when powering...
      02-13-2025, 09:45 PM
    • Loading...
    • No more items.
    Working...