Announcement

Collapse
No announcement yet.

Samsung LN32c450E1D troubleshooting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: Samsung LN32c450E1D troubleshooting

    There probably isn't a main board schematic available.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      #22
      Re: Samsung LN32c450E1D troubleshooting

      Hi budm Sorry I took so long. I was away for a few days. I decided to remove the Main Board from the chassis and was surprised to find that the bottom of the board is stained with obvious water marks. I think it is from condensation of the air in the room. There is no sign of water any where else, so I think that the board may have been damaged by the condensed water. I would like to replace the whole Main Board. What do you think?

      Comment


        #23
        Re: Samsung LN32c450E1D troubleshooting

        Try downloading the service manual from ELEKTROTANYA
        http://elektrotanya.com/?q=showresul...oria=&kat2=all
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment


          #24
          Re: Samsung LN32c450E1D troubleshooting

          Hello everyone! I have the same issue with no standby LED and won't turn on. Backlight lit when supply to the mainboard is disconnected and all output readings are all correct from 5v and 13v but when I connect the supply to the mainboard only 5v is passing through the mainboard and the 13v supply is missing, what seems to be the problem. Thanks for any helpful reply and sorry for my bad english. (SAMSUNG LN32c450E1D remote power switch only model)

          Comment

          Working...
          X