Samsung LN32c450E1D troubleshooting

[tom66]

Re: Samsung LN32c450E1D troubleshooting

There probably isn't a main board schematic available.

[skinamo]

Re: Samsung LN32c450E1D troubleshooting

Hi budm Sorry I took so long. I was away for a few days. I decided to remove the Main Board from the chassis and was surprised to find that the bottom of the board is stained with obvious water marks. I think it is from condensation of the air in the room. There is no sign of water any where else, so I think that the board may have been damaged by the condensed water. I would like to replace the whole Main Board. What do you think?

[budm]

Re: Samsung LN32c450E1D troubleshooting

Try downloading the service manual from ELEKTROTANYA
http://elektrotanya.com/?q=showresul...oria=&kat2=all

[dainzel]

Re: Samsung LN32c450E1D troubleshooting

Hello everyone! I have the same issue with no standby LED and won't turn on. Backlight lit when supply to the mainboard is disconnected and all output readings are all correct from 5v and 13v but when I connect the supply to the mainboard only 5v is passing through the mainboard and the 13v supply is missing, what seems to be the problem. Thanks for any helpful reply and sorry for my bad english. (SAMSUNG LN32c450E1D remote power switch only model)