MAXENT P500550H9 No Video/Backlight

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • crdz66
    Badcaps Veteran
    • Nov 2012
    • 242
    • USA
    #1

    MAXENT P500550H9 No Video/Backlight

    Hello Fellas.

    I have a problem with this Lcd/Monitor Maxent P500550H9
    I can't get backlight and video either.

    The TV turn on normaly (without backlight or video), and after couple seconds, the green light indicator start blinking.

    The standy voltages are good and something I noticed was, the voltage going to sc board (12v) drop quickly to 0 volts after couple seconds.

    No caps blowed or something like that.

    I can't find for anywhere the schematics.

    Need you help what going on.

    Thanks
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Max514
      Samsung UN55H8000 sound but no backlight no video
      by Max514
      Hi all,

      Ok so I have this beautiful un55h8000 samsung tv with sound but no video nor backlight. When turning the set on the red light blinks 5 times.

      The screen shows no damage and backlight turns on when I disconnect the power supply from the main board. The tcon board only has 2 out of 3 leds on.

      I came across this page and followed the different steps: https://techhometravel.com/samsung-u...ight-no-video/
      • Unplugging the main board cable at the power supply >>> backlights came on.
      • BLU_ON signal from the
      ...
      04-14-2022, 10:34 AM
    • Document Archive
      HP EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera EliteDesk 800 i7-7700 Specification for Upgrade or Repair
      by Document Archive
      This specification for the HP EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera boardview and EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our...
      09-12-2024, 02:00 PM
    • edugimeno
      LG 43UK6300PLB has backlight but no video
      by edugimeno
      Hi! This TV was ready for the trash so I picked it up before it was thrown away

      It's pretty new, so I thought I should give it a try. I plugged it in at home and I was expecting blown backlight as most of the TV's that get to me, but in this case it showed backlight with no video at all (no logo no menu no nothing).

      TV seems internally responsive, drives stdby led red when OFF, responds to remote to turn on and off, but gets no image at all
      Anything common on these sets to start with?

      Thanks!...
      03-26-2024, 03:29 AM
    • avisonjohn
      LG 34UM68 backlight and 'chime' on start up, but no OSD or video
      by avisonjohn
      I have an LG 34UM68 with board EAX66876002 but it has issues with not working correctly.

      It powers on, backlight comes on, but there is no OSD shown, and no video shown on the screen.

      I checked over the board for any obvious visual damage, and everything looked OK.

      I then took a dump of the main SPI Flash chip.
      I tried to take a dump from the EEPROM, but it would sometimes read data correctly, and other times would had obvious reading problems.

      I managed to get a dump from it which somewhat resembled correct data - part of the...
      10-30-2023, 09:23 AM
    • TVAddict
      Samsung UN50NU6900BXZA - Boot loop with backlight, no video
      by TVAddict
      Hi everyone, so as the title says i have a 50" Samsung tv that boots repeatedly with a quick backlight turn on then off with no video what so ever, no logo, no chime on sound either.

      I have been reading a few of the threads that had similar problems to mine and i have decided to go ahead and try a few of the suggestions from those threads (with nothing to lose in mind).

      So without writing a novel, i'll try to keep it simple, ALL power supply voltages both to the mainboard and backlight's seem ok and stable, so it lead me to the mainboard where i disconnected...
      01-15-2022, 08:17 PM
    • Loading...
    • No more items.
    Working...