RCA L42WD22YX5 waves on top side of the screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Beowulf
    Senior Member
    • Dec 2012
    • 175
    • USA

    #1

    RCA L42WD22YX5 waves on top side of the screen

    Hi,
    These waves, as you can see in the picture, come on for a few minutes after turning the TV on, then disappear. It's somehow temperature related
    'cause if the TV is turned on after being off for a long time, the waves take longer to disappear than if the TV was turned on after being off for a few minutes.
    I feel this could be related to electrolytic capacitors starting to go bad, but on what section? or does anybody have a better idea of what could be the problem?

    Regards,
    Attached Files

Related Topics

Collapse

  • Ryan.man
    Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
    by Ryan.man
    Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

    My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

    This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
    02-04-2025, 12:23 PM
  • ravi_1617
    HCL Laptop SCREEN SIZE SHRINK LEFT SIDE AROUND 2 INCHES
    by ravi_1617
    Hello to all ,
    I have this HCL ME LAPTOP K 41 ,screen image is shrieked clock /speaker left side approx. 2 inches .Its 14.1 LCD SCREEN. I have replaced lcd screen ,found no difference
    Its blank that area blank and bottom of Task bar is rolled at bottom displaying top portion image . In bios /setup also getting same problem
    on external VGA port image is perfect /normal , Attached image...
    07-25-2025, 12:07 AM
  • reformatt
    Macbook Air M2 A2681 Kernel panics after screen replacement
    by reformatt
    Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

    It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
    07-31-2025, 08:37 PM
  • smic717394
    iphone XS turns off when press on screen.
    by smic717394
    Hi,

    I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
    07-25-2024, 10:16 AM
  • ipatch
    ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
    by ipatch
    i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
    08-24-2024, 02:36 PM
  • Loading...
  • No more items.
Working...