Have a Samsung Pn50A450 plasma tv, picked it up clicking off and on. Diagnosed ymain had 3 faulty fets on heat sink. Purchased remanufactured ymain, now the tv stayson,no clicking, y main is humming like it should, panel has light glow. But I still have no picture,menu,nothing on the display.
-
-
Re: Samsung PN50A450 No picture issue.
OK, if you post a pic of the control board (connects to y-main through flat flex cable) I will outline procedure for making it show test patterns to prove plasma boards work. Main board is common failure on this model.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: Samsung PN50A450 No picture issue.
I know,sorry for picture quality.Attached FilesComment
-
-
Re: Samsung PN50A450 No picture issue.
Mkay, see image.
All connection changes done with power OFF and set UNPLUGGED.
When you power up with the jumper in place you should see test patterns:
http://www.youtube.com/watch?v=JCtF53GKE0AAttached FilesPlease do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
-
Re: Samsung PN50A450 No picture issue.
I have a similar model, PS-50A457P1D, with the same fault. Replaced bad caps on power supply and Y-sus, and now screen lights up, but no picture, just sound. Mine has the same control board as above, but jumping 3 &4 doesn't produce test images. I'm guessing a mainboard is my next replacement?Comment
-
Re: Samsung PN50A450 No picture issue.
If the test patterns don't work but the screen is definitely glowing, it's more likely the control board is at fault (the one in the picture above.) Make sure LVDS is definitely disconnected.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung PN50A450 No picture issue.
Thanks, I'll grab a control board, and give it a go
Comment
-
Re: Samsung PN50A450 No picture issue.
Yea the jumper across 3 and 4, with lvds cable disconnected does no show any patterns,colors etc. The control has 2 leds on it, one is blinking the other briefly lights when powered up then goes off. I guess I will be looking for a control board also.Comment
-
Re: Samsung PN50A450 No picture issue.
Replacing the control board, did not fix the issue, still cannot get test pattern to come up. So i guess im looking for a new main.Comment
-
Re: Samsung PN50A450 No picture issue.
Main what? X-main, Y-main, main board?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung PN50A450 No picture issue.
main boardComment
-
Re: Samsung PN50A450 No picture issue.
tom do you have the service manual for this model?Comment
-
Re: Samsung PN50A450 No picture issue.
Not gonna be the main board. The test you did basically has isolated the main board. It's PSU, x-main, y-main, buffers or panel now.
http://www.tgohome.com/ServiceManual...&Search=SubmitPlease do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung PN50A450 No picture issue.
Really? Y main with buffers built in is new, psu voltages are good. X main heat sinks are warm like should be. Panel has glow.Comment
-
Re: Samsung PN50A450 No picture issue.
Panel has glow, but when you do the 3-4 test, is it still glowing?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung PN50A450 No picture issue.
Glow is there either way, only difference is with jumper connected it right when screen first powers up "GLOWS" it has different colored sparkles everywhere for a half second. It just a black glowing screen with lvds cable connected and no jumper.Comment
-
Re: Samsung PN50A450 No picture issue.
Did you disconnect LVDS during the jumper? Sounds like Y-main fault.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung PN50A450 No picture issue.
Yes lvds disconnected during jumper, this is second y main I have tried, first board I purchased was thought to be defective so I returned it, new one same thing.Last edited by topfli8979; 02-23-2013, 03:24 PM.Comment
-
Re: Samsung PN50A450 No picture issue.
Don't know then, unfortunately.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung PN50A450 No picture issue.
Im not gonna give up on this beast. I unplugged the x main, screen gets a red tint. Only other board possibility is psu or main.Comment
-
Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.
The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.
Original T-con:
Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.
First replacement T-con:
I thought it might be t-con and ordered new t-con from china(supposedly tested)... -
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
Hi my samsung tv comes on fine the after a minute or two the picture goes like attached any ideas? -
I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and...
Comment